Sunday, January 26, 2014

Beautiful Every Time FTU

Beautiful Every Time

I used the wonderful poser called Kaylee by Designs by Norella which you must be licensed to use. You can \purchase her tubes from PicFor Design which can now be found here
I am using a  FTU scrapkit called No Apologies which can be found at Vix PSP blog here.
Font of Choice  
Mask of Choice I used Vix 431  these masks are Here 
Plug in used was Xero Porcelain and Soft Vignette
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 10 from the scrapkit onto your new image resize by 140%  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.  
Open element 12 and copy & paste to your image and place on the right of your mask  
Open element 5 copy & paste to your image and place at the bottom middle on your mask so that the leave is off the mask
Open element 1 and copy & paste to your image and place on the right of your mask  
Open element 4 and copy & paste to your image and place on the right of your mask across the bottom
Open element 6 and copy & paste to your image duplicate x1 and place on the right of your mask (see tag for placement) 
Open element 13 and copy & paste to your image and place on top of your flowers  
Open element 9 copy & paste to your image  take your magic wand using the following settings

 and click inside of your frame expand your selections with the following setting

Open paper 5 copy and paste to your image  and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice copy & paste it to your image resize if need ( I resized 20%) and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none go to effects xero soft vignette and apply with the following settings

Open element 9 copy & paste to your image  take your magic wand using the same settings as above
and expand setting using the same setting as above
Open paper 5 copy and paste to your image  and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice copy & paste it to your image resize if need ( I resized 75%) and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none go to effects xero porcelain and apply with the following settings

Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the right side of your image
Add a dropshadow of choice to your tube and frames (I used horz 4 vert 3 opacity 45 blur 20)

Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Are you in Love PTU


Looking for Love

I used the wonderful artwork called Noella by Chris Pastel which you must be licensed to use. You can purchase her tubes from The PSP Project which can now be found here
I am using a beautiful scrapkit called Love Birds by Tasha's Playground which can be purchased at The PSP Project here
Font of Choice  I used Beautiful every Time
Mask of Choice I used Weescotslass WSL51 & WSL281  these masks are Here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 11 from the scrapkit onto your new image and apply your mask of choice. (I used WSL281) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group.  
Open doodle copy & paste to your image duplicate x1 and place one on the right of your mask and one on the left of your mask
Copy & paste paper6 from the scrapkit onto your new image and apply your mask of choice. (I used WSL51) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group.  
Open hearts and copy & paste to your image  
Open birdcage2 copy & paste to your image and place it so that the hanger is just to the right of the center of your heart mask
Open branch copy & paste to your image  and place it on the across the top of your masks
Open heart3 copy & paste to your image and place it in the middle right side of your masks
Open hanger copy & paste to your image resize by 75%  and place it on the right side of your branch just a little from the end of it so that it looks like it is hanging off the branch
Open flowers copy & paste to your image and place it on the bottom left side of your mask
Open frame1 copy & paste to your image  Using your magic wand with the following settings

 click inside your frames and expand your selections with the following settings

Open paper 7 copy and paste to your image - go to selections invert and hit delete on your keyboard.  Move this layer below your frame.
Open your tube or tubes of choice and copy & paste to your image rsize as needed (I resized by 75%) duplicate x1 and flip one of the copies horizontal place one r of your frame then turn off this layer for now and the flipped one in the second frame move layer down so that in the left frame and one in the right frame the head is showing behind the frame  Using your magic wand with the same setting as above click inside each of the frames and follow the same directions as for the paper above except when you go to delete highlight one tube layer than hit delete and then the other tube layer hit delete all that is left is the part of the tube inside the frame  Change the layer to luminance on each of the tube layers.
Open flower4 copy & paste to your image  and place it on the left end of your branch
Open bird3 & paste to your image resize by 50% and place it  in the center of the pink heart
Open bird2 copy & paste to your image resize by 50% and place it on your branch above the hanger
Open bird1 copy & paste to your image resize by 50% and place it on top of your left frame
Open sparkles copy & paste to your image
Open your tube of choice resize as needed (I resized by 75%) and place it over the middle frame Add a dropshadow of choice 
Open border copy & paste to your image and place it across the bottom of your frame
Open label2 copy & paste to your image and place it across the bottom of your tube 

 Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Sunday, January 19, 2014

Looking for Love FTU


Looking for Love

I used the wonderful poser called Cutie by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here
I am using a scrapkit called Pastel Valentine by Designs by Vaybs  which is FTU  and can be found here
Font of Choice 
Mask of Choice I used Weescotslass WSL364  these masks are Here 
Plugins used was xero porcelain
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 11 from the scrapkit onto your new image resize by 144%  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element 29 and copy & paste to your image and move to the bottom right of your mask
Open  element 5 and copy & paste to your image and place it at the bottom left of your mask
Open  element 4 and copy & paste to your image and place it at the bottom left of your mask and move it up slightly
Open  element 25 and copy & paste to your image  and place on the bottom of the mask slightly in from the left
Open  element 27 and copy & paste to your image and place it next to your purple rose so that it cover about half of the purple rose
Open  element 21 and copy & paste to your image and place it in the top right corner of your mask take your magic wand using the following settings
and click inside of your frame you made expand your selections  with the following setting

  Open paper 12 copy and paste to your image  and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice  copy & paste it to your image resize if need (I resized 64%)  and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none 
Go to effects xero porcelain and apply with the following settings

Add a dropshadow of choice to the frame
Open  element 28 and copy & paste to your image and place it so that it is attached to the bottom of your frame
Open  element 47 and copy & paste to your image  and place it so that the butterfly in on the second loop of your heart frame
Open  element 53 and copy & paste to your image resize by 63%  and place on the right side of your be mine heart
Open  element 54 and copy & paste to your image resize by 63% and place it on the bottom of your candle  Add a dropshadow of choice
Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left side on the of your heart frame Add a dropshadow of choice (I used vert 5 horz 3 opacity 50 blur 5)
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Friday, January 17, 2014

Waiting for Valentines FTU


Waiting for Valentines

I used the wonderful artwork by Joel Adamswhich you must be licensed to use. You can purchase his tubes from CDO which can now be found here
I am using a scrapkit called Candy Love by Topcats Tagz  which is FTU  and can be found here
Font of Choice 
Mask of Choice I used Weescotslass mask 223  these masks are here 

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting 

it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for 

placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 2 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 
Open element 31 and copy & paste to your image duplicate x1 and place in the top left corner of your mask with one slightly higher than the other 
Open  element 39 and copy & paste to your image  
Open  element 14 and copy & paste to your image and place it across the bottom of your mask
Open  element 32 and copy & paste to your image resize by 55% and place in on the bottom right of your mask so that half if off the mask
Open  element 51 and copy & paste to your image and move it up to the top of your image
Open  element 28 and copy & paste to your image  and place it on the left side of your mask but slightly in from the edge
Open  element 36 and copy & paste to your image and place on the bottom left side of the mask beside element 28 
Open  element 50 and copy & paste to your image and place at the bottom of your mask in the middle 
Open  element 30 and copy & paste to your image and place on the top right side of your mask
Open element 17 copy & paste resize by 55% and place it beside the key & heart
Open your tube of choice copy & paste to your image resize as needed  and place it on the  bottom left side on the image
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Beautiful Fairies PTU

Beautiful Fairies

I used the wonderful artwork called Black Rose Sisters by Kathy Cyr which you must be licensed to use. You can purchase her tubes from The PSP Project which can now be found here
I am using a scrapkit called Sweet Moments by Dran Design  which is PTU  and can be found at PicForDesign  here
Font of Choice 
Mask of Choice I used Weescotslass mask 248  these masks are Here 

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 3 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. Go to adjust manual color correction and use the following settings (top color is R:147 G:182 B:176 and bottom is R:58 G:139 B:157)

Open element 26 and copy & paste to your image and place in the lower right corner of your mask 
Open  element 32 and copy & paste to your image and place it at the bottom left of your mask
Open  element 20 and copy & paste to your image flip horizontal and place it at the top left of your mask so that part of it is off the mask
Open  element 18 and copy & paste to your image and move it slightly to the right
Open  element 19 and copy & paste to your image and move it slightly to the left
Open  element 23 and copy & paste to your image resize by 87%  and place it across the bottom of your mask
Open  element 58 and copy & paste to your image resize by 37%  and place at the top of your flowers of the right
Open  element 1 and copy & paste to your image resize by 45% and place it at the top of your image in the middle
Open  element 2 and copy & paste to your image resize by 45%  and place on the middle of your flowers on the right 
Open your tube of choice copy & paste to your image resize as needed (I resized 80%) and place it on the left 

side on the image
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Purple Passion FTU

Purple Passion

I used the wonderful poser called Megan by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here
I am using a scrapkit called I love Purple by TopCat Tagz  which is FTU  and can be found here
Font of Choice 
Mask of Choice I used Vix Big Mask16  these masks are Here 
Plugins used was Candyeye 4 Bevel Boss
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 15 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element 35 and copy & paste to your image  
Open  element 41 and copy & paste to your image and place it at the bottom right of your mask
Open  element 25 and copy & paste to your image and place it at the top left of your mask
Open  element 31 and copy & paste to your image duplicate 6 and place them in a circle at the top right of your mask 
Open  element 48 and copy & paste to your image and place it on the left side of your fan
Open  element 22 and copy & paste to your image and place it in the middle of your feather
Open paper 13 and minimise it to the bottom of your of your work area Go to the color palette and turn off the bottom color and make the top color paper 13  Using your Ellispe tool draw a circle with the following setting

(I made it the size of the canvas you can resize later)  Change the layer to a raster layer and go to effects Candyeye 4 bevel boss and use the following settings

 take your magic wand using the following settings

 and click inside of your frame you made expand your selections with the following setting

 Open paper 20 copy and paste to your image  and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice  copy & paste it to your image resize if needed  and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none  Merge the three layers of your frame (frame, paper & tube) and resize as needed to fit (I resized 68%) and place it in the top right corner of your mask over your flowers and adjust your flowers if needed so that they partially show around the frame
Open  element 39 and copy & paste to your image and place it so that the balloon heart is on the bottom right of your frame
Open  element 14 and copy & paste to your image  and place it at the bottom of your image in the middle
Open  element 19 and copy & paste to your image duplicate x1  and place on on each side of the candle
Open  element 20 and copy & paste to your image and place it in the middle of the other 2 cupcakes
Open  element 18 and copy & paste to your image and place it in the bottom right of your image
Open element 2 resize by 48% and place it on the bottom right over the cupcake
Open element 37 copy & paste to your image and place it at the bottom right of your image
Open element 38 copy & paste to your image and place on the left side of your nail polish
Open element 2 copy & paste to your image and place it on the right side of your frame in the middle
Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left side on the image
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Saturday, January 11, 2014

On my Way to Route 66 PTU

One my Way to Route 66

I used the wonderful artwork called Wishful Thinking by gIO which you must be licensed to use. You can purchase her tubes from The PSP Project which can now be found here
I am using a scrapkit called Boy Loves Girl by Amy Marie which is PTU  and can be purchased at The PSP Project here.
Font of Choice I used Aspire
Mask of Choice I used Weescotslass WSL218 these masks are Here 
Plugins used was xero soft vignette
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 6 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the pop up. Now right click on group layer merge merge group.  
Open 63 and copy & paste to your image and place it at the top left of your mask.
Open 11 copy & paste to your image  resize by 57% and place it at the top of your road take your magic wand using the following settings

 and click inside of your heart expand your selections with the following setting

Open paper 10 copy and paste to your image ( make sure the paper covers the inside of your hearts) and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice (I used 2 different ones that came with the tube) copy & paste it to your image resize if need ( I resized 77%) and move it so that the part of the tube you wish to keep is situated in the heart opening them hit delete repeat for other heart opening then go to selection select none  
Open 43 copy & paste to your image and place it in the middle so the the small rose is touching the second heart duplicate x1 and flip horizontal and place it on the right side of your mask so that the top small rose is off the mask
Open 8 copy & paste to your image and place on the left side on your mask at the top of your mask so that the top rose in touching the heart
Open 52 copy & paste to your image and place it on the left over the roses
 Open 65 copy & paste to your image and place it at the bottom right side of your mask
Open 31 copy & paste to your image and place on the left side of the jukebox
Open 98 copy & paste to your image and place it in the bottom left corner of your image
Open 37 copy & paste to your image resize by 57% and place it so that it hangs below the hearts
Open 22 copy & paste to your image and place it at the bottom of your road
Go to layers click on a layer and merge layers visible you should have this as a layer
Go to effects xero soft vignette and apply the following settings (if you don't have this plugin you can leave as is or play around with the others)

 Open your tube of choice and copy & paste to your image resize as needed (I resized by 77%)  and place between the car and the jukebox  add a dropshadow of your choice
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Friday, January 10, 2014

Capital A for Attitude FTU

Capital A for Attitude

I used the wonderful poser called Electra by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here
I am using a scrapkit called  Diva With an Attitude which is FTU  and can be found at Twinky Dezines here.
Font of Choice  I used Engagement
Mask of Choice I used Weescotlass WSLMask220  these masks are Here 
Plugins used were xero radiance
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper8 from the scrapkit onto your new image resize by 144% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.  
Open corset2 and copy & paste to your image and place it on the left side of your mask so that a small part of the mask shows
Open ribbonboweyelet2 copy & paste to your image resize by 79% duplicate x1  and place one on each side of the corset
Open Negativeframe2 copy & paste to your image  place it at the bottom of the mask and take your magic wand using the following settings 

and click inside of your frame expand your selections with the following setting

Open paper 4 copy and paste to your image ( make sure the paper covers the inside of your frame) and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice (I used the largest one of the face) copy & paste it to your image resize if need ( I resized 41% for the two on the ends and left full size in the middle frames) and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none repeat this for all four frame openings 
Open ribbon copy & paste to your image and place it in the middle of your corset
Open lips copy & paste to your image resize by 27% and place on the right side on your mask in the middle free rotate with the following settings

 Go to layers click on a layer and merge layers visible you should have this as a layer

Go to effects xero radiance and apply the following settings (if you don't have this plugin you can leave as is or play around with the others)



Open your tube of choice and copy & paste to your image resize as needed (I resized by 20%)  and place on the right side of the wordart
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Saturday, January 4, 2014

A Blast Of Winter PTU

A Blast of Winter

I used the wonderful artwork called January Cold by Shayna Hall which you must be licensed to use. You can purchase her tubes from The PSP Project  which can now be found here
I am using a PTU scrapkit called Winter Blush by Tasha's Playground which can be found at The PSP Project here.
Font of Choice  
Mask of Choice 
 The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 7 from the scrapkit onto your new image rsize by 115% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.  
Open branch2  and copy & paste to your image and place it at the bottom left of your mask  
Open wheel and copy & paste to your image and place it at the bottom right of your mask  
Open leaf2 and copy & paste to your image  duplicate x2 and place them on the right side of your mask starting in the middle and placing the last one at the top of your mask 
Open leaves1 and copy & paste to your image  duplicate x2 and place them on the right side of your mask starting in the middle and placing the last one at the top of your mask 
Open leaves2 and copy & paste to your image  duplicate x2 and place them on the left side of your mask starting in the middle and placing the last one at the top of your mask 
Open frame 4 copy & paste to your image  take your magic wand using the following settings

 and click inside of your frame expand your selections with the following setting

Open paper 9 copy and paste to your image move if need so that it covers the inside of your frame and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice copy & paste it to your image resize as needed (I resized 120%) and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none  
Open snowballs copy & paste to your image  and place it on the bottom of your frame
Open snowpile2 copy & paste to your image and place it below snowballs on the bottom
Open branches copy & paste to your image  and place it on the top of your snowpile
Open wind copy & paste to your image  and place it on the top of your snowpile & branches
Open pinecone copy & paste to your image  and place it on the top of your snowpile & branches
Open sled copy & paste to your image  and place it on the left side of your snowpile & branches
Open ribbon1 copy & paste to your image  and place it so that it goes above your frame at the top
Open your tube of choice copy & paste to your image resize as needed and place it on the left side of your frame Open berry2 copy & paste to your image resize by 31% and place it on the bottom of your frame in the middle
Open element copy & paste to your image and place it in the top right corner of your frame
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

A Touch of Elegance PTU

A Touch of Elegance

I used the wonderful artwork called Diane by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here
I am using a beautiful PTU scrapkit called Stronger with Love by WD Designz which can be found at Treasured Scraps here.
Font of Choice  
Mask of Choice  
Plug in used was Xero Porcelain
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper 2 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group.  
Open element 54  and copy & paste to your image and place it at the top left of your mask  
Open frame 7copy & paste to your image and move it slightly to the left take your magic wand using the following settings  
and click inside of your frame expand your selections with the following setting

Open paper 13 copy and paste to your image move if need so that it covers the inside of your frame and hit selections invert delete move this layer under your frame do not deselect
Open your tube of choice copy & paste it to your image resize as needed (I resized 48%) and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none go to effects xero procelain and apply the following settings

Open element 15 copy & paste to your image  resize by 87% and place it on the right side of your mask  
Open element 50 copy & paste to your image and place it so that the bottom large butterfly is on the middle right of your frame
Open element 52 copy & paste to your image resize by 52% and place it on the bottom left of your mask
Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the right  side of your frame  
Open element 55 copy & paste to your image resize by 31% and place it on the bottom of your frame in the middle
Open element copy & paste to your image resize by 31% and place it in the middle of element 55
Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!