Are you Lucky? FTU

Are you Lucky?

I used the wonderful poser called Brook by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here

I am using a scrapkit called Feeling Lucky by Gothic Inspirations which is FTU and can be found here  

Mask of Choice I used WSL (Weescotslass) WSL362

Font of Choice

Plugin Used Xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper2 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Repeat above for the mask but use paper 10 and after you merge group resize by 87%

Open greenery1 and copy & paste to your image duplicate x1 and place one below greenery1 and the other below this one

Open  cloverspray and copy & paste to your image resize by 91% and place it below your last greenery

Open  tab-GI and copy & paste to your image and place across the bottom of your mask

Open glitterstring and copy & paste to your image duplicate x1 and place on in the top right corner of your mask and the other on the bottom left of your mask just above the tab-GI

Open clover2 and copy & paste to your image duplicate x3 and place one in the middle of your mask on the left one in the top middle of your mask one in the left top of your mask and one on the tab just about 1/3 from the right

Open beer one copy & paste to your image and place it on the tab next to the clover covering half of the clover 

Open green beer copy & paste to your image and place it on the right next to beer one

Open frame2 and copy & paste to your image  resize by 68% and place it in the top right corner of your mask so that the top of your leaves and clover show behind it  take your magic wand using the following settings 

and click inside of your frame you made expand your selections with the following setting

 Open paper5 copy & paste to your image and hit selections invert delete move this layer under your frame Open your tube of choice copy and paste to your image and place the part of your tube you want to keep in the marching ants and hit selections invert delete move this layer under your frame go to selection select none 

Go to effects xero porcelain and apply with the following setting to your tube layer

Add a dropshadow of choice to the frame (I used vert5 horiz4 opacity50 blur2 color black)

Open charm chain and copy & paste to your image resize by 73% and place on your frame just above the frame opening

Open word art and copy & paste to your image resize by 87% and place on the top of your frame

Open blarney stone and copy & paste to your image resize by 73% and place on the bottom of your frame in the middle

Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the right side of your frame on top of the beers  Add a dropshadow of choice

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Symbols of Love FTU

Symbol Of Love

I used the wonderful artwork called Patty Clover by Ninaste which you must be licensed to use. You can purchase his tubes from Beehive Digital Studio which can now be found here

I am using a scrapkit called Sweet Angel which is FTU by Lacarolita and can be found here  .

Font of Choice  

Mask of Choice  

 The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper 7 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.  Resize by 108%

Copy & paste paper 8 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.

Open rose2 and copy & paste to your image and place it at the top of your mask just slightly to the right from the middle

Open rose5 copy & paste to your image and place on the right top on your mask next to the blue one

Open rose4 copy & paste to your image and place it beside the pink rose

Merge all your roses together (merge down) resize by 84% and free rotate with the following setting

Open heart3 copy & paste to your image resize by 40% and place it in the bottom right corner of your mask

Open heart4 copy & paste to your image resize by 40% and place it at the top left side of your mask

Open doodle3 copy & paste to your image and place it on the right side of your image so that the end of it is on the last rose

Open flower2 copy & paste to your image resize by 40% and place on the bottom of the pink heart

Open glitter1 copy & paste to your image resize by 71%

Open glitter2 copy & paste to your image resize by 71%

Open doodle4 copy & paste to your image

Open your tube of choice and copy & paste to your image resize as needed (I resized by 112%) and place in the middle of your image

Open ribbon3 copy & paste to your image resize by 61% and place it across the bottom of your tube

Open ribbon3 copy & paste to your image resize by 61% and place it across the bottom of your tube on top of the blue ribbon

Open bow1 copy & paste to your image resize by 36% and place it on top of your ribbons duplicate x1

Open bow2 copy & paste to your image resize by 36% and place it on top of your ribbons duplicate x1

Alternate the bows across the ribbons

Open border 1 copy & paste to your image resize by 84% and place across the bottom of your image

Open border2 copy & paste to your image resize by 84% and place just above the pink stars

Add whatever else you would like

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Wearing of the Green PTU

Wearing of the Green

I used the wonderful poser called Alby by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicFor Design which can now be found here

I am using a PTU scrapkit called Irish Dreams which can be found at Tiny Turtle Designs here.

Font of Choice  

Mask of Choice 

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper40 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.   

Open element 129 and copy & paste to your image and place on the left top of your mask duplicate x1 and move the copy to the right of the first one 

Open element 147 copy & paste to your image duplicate x1 and place on the top of your mask on the right side by side

Open element 54 copy & paste to your image  take your magic wand using the following settings

and click inside of your frame expand your selections with the following setting

Open paper 21 copy and paste to your image and hit selections invert delete move this layer under your frame do not deselect

Open your tube of choice copy & paste it to your image resize if need ( I resized 20%)  duplicate x3 and flip horizontal 2 of the copies and arrange them so that they are across the opening of your frame and the part of the tube you want to keep is showing inside the frames hit delete on each of your tube layers go to selection select none merge your tube layers together (merge down) until they are one layer then change the layer to luminance legacy 

Open element 79 and copy & paste to your image and place on the bottom of your mask  

Open element 109 and copy & paste to your image resize by 36% and place on the right of your frame in the middle 

Open element 2 and copy & paste to your image and place it across the bottom opening of the frame

Open element 1 and copy & paste to your image and place on the bottom left of your mask  

Open element 4 and copy & paste to your image  resize by 75% and place across the bottom of the mask

Open element 78 copy & paste to your image resize by 76% and place in the middle of your image

Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left  side of your frame  

Add a dropshadow of choice to your tube  (I used horz 4 vert 3 opacity 45 blur 20)

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Beauty with Grunge FTU

Beauty with Grunge

I used the wonderful poser called Zoe by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here

I am using a scrapkit called Grunge by Dig-Mania which is FTU and can be found here (11 down on page)

Mask of Choice I used WSL (Weescotslass) WSL117

Font of Choice

Plugin Used Xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste pape1 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Repeat above for the mask but use paper 6 and after you merge group resize by 83%

Open nailpolish and copy & paste to your image and move to the bottom right of your mask

Open lipstick and copy & paste to your image and place it next to your nailpolish

Open  flower2 and copy & paste to your image and place in the right top of your mask

Open  flower4 and copy & paste to your image and place in the middle top of your mask

Open  flower and copy & paste to your image and place it next to the left of your middle blue flower

Open  wire and copy & paste to your image and place it across the blue flower 

Open frame1 and copy & paste to your image and place it in the top right corner of your mask so that the top of your flowers show behing it  take your magic wand using the following settings

 and click inside of your frame you made expand your selections with the following setting Open your tube of choice copy and paste to your image resize by 46% duplicate x1 flip horizontal one of the tubes  and place the part of your tube you want to keep in the marching ants (one in each frame opening) and hit selections invert delete move this layer under your frame go to selection select none 

Go to effects xero porcelain and apply with the following settings to both tube layers

Add a dropshadow of choice to the frame (I used vert5 horiz4 opacity50 blur2 color black)

Open ribbon1 and copy & paste to your image and move to the bottom left of your mask so that the end touches the lipstick

Open ribbon4 and copy & paste to your image and move just above your blue ribbon

Open ribbon 3 and copy & paste to your image and move just above the brown ribbon

Open bow3 copy & paste to your image and place at the bottom of your frame in the middle

Open grunge copy & paste to your image and place bottom left of your mask

 Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left side on the of your  frame Add a dropshadow of choice 

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Forever Yours FTU

Forever Yours

I used the wonderful artwork of Enamorte  which you must be licensed to use. You can purchase his tubes from CDO which can now be found here

I am using a scrapkit called Romance which is FTU by Clarez Creationz and can be found here  .

Font of Choice  

Mask of Choice  

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper4 from the scrapkit onto your new image resize by 125% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layermerge merge group.  

Open R46 and copy & paste to your image  

Open R101 copy & paste to your image and place on the left top on your mask

Open R32 copy & paste to your image and move it so the the silver part on the right of the heart is touching the right side of the ribbon on your first heart

Open R41 copy & paste to your image  and place in the middle of the top of your mask

beside the black leaves of your rose

Open R23 copy & paste to your image and place it so that the blue heart is on the bottom of your red heart

Open R09 copy & paste to your image and place it in the middle of your right side mask over the blue heart

Open R28 copy & paste to your image and place so that the top part of the ribbon is over the top of the red heart

Open R11 copy & paste to your image and place it below the red ribbon

Open R16 copy & paste to your image and place so that the top part of the lollipop is above the right side of the large blue heart

Open R37 copy & paste to your image and place on the stick of the lollipop

Open R49 copy & paste to your image and place on the stick below the red heart

Open R28 copy & paste to your image and place so that the top part of the ribbon is over the top of the red heart

Open your tube of choice and copy & paste to your image resize as needed and place in the middle of your image

Open R27 copy & paste to your image and place it across the bottom of your tube

Open R24 copy & paste to your image and place on one end of your ribbon

Open R08 copy & paste to your image and place on other end of your ribbon

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Angel Eyes PTU

Angel Eyes

I used the wonderful poser called Heather by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here

I am using a scrapkit called Angel Eyes by Hania Designs which is PTU and can be purchased here

Mask of Choice 

Font of Choice

Plugin Used Xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper 5 from the scrapkit onto your new image resize by 125%  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element 66 and copy & paste to your image and move to the bottom left of your mask

Open  element 73 and copy & paste to your image and place it at the top right of your mask so that some of the leaves are off the mask

Open  element  65 and copy & paste to your image 

Open  element 94 and copy & paste to your image and place in the middle top of your mask

Open  element 36 and copy & paste to your image  resize by 63% and place it on the bottom middle of your mask 

Open  element 48 and copy & paste to your image and place it in the left side of your mask   

Open  element 45 and copy & paste to your image and place it on the left side of your mask at the bottom

Open  element 14 and copy & paste to your image and place it on the bottom of your mask so that the bottle start on the green leaves of your rose

Open  element 7 and copy & paste to your image and place it in the left side of your mask   

Open element 100 and copy & paste to your image resize by 50% and place it in the top right corner of your mask between the flowers and the green leaves  take your magic wand using the following settings

 and click inside of your frame you made expand your selections with the following setting 

Open your tube of choice copy and paste to your image flip horizontal and place the part of your tube you want to keep in the marching ants and hit selections invert delete move this layer under your frame go to selection select none 

Go to effects xero porcelain and apply with the following settings

Add a dropshadow of choice to the frame (I used vert5 horiz4 opacity50 blur2 color black)

 Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left side on the of your  frame Add a dropshadow of choice 

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Fairy in Enchanted Land FTU

Fairy In Enchanted Land

I used the wonderful artwork  by Elias which you must be licensed to use. You can purchase his tubes from Elias which can now be found here

I am using a scrapkit called Enchanted Dreams which is FTU  and can be found at Inzpired Creationz (3 one down in the bundle)  here

Mask of Choice 

Font of Choice

 The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper 8 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.  

Open Grass 1 and copy & paste to your image and place it on the left bottom of your mask.

Open Door 1 copy & paste to your image 

Open Scattered Petals copy & paste to your image and place it so the top petal is up in the right hand corner

Open Lanterns 1 copy & paste to your image and place across the top of your mask

Open key copy & paste to your image resize by 36% and place on the left side end of the string on your lanterns

Open flower1 copy & paste to your image and place on the left side of your mask

Open mushroom 1 copy & paste to your image resize by 36% and place it on the left side of the blue grass

Open lantern1 copy & paste to your image resize by 50% and place it in next to the mushrooms

Open mushroom3 copy & paste to your image resize by 36% and place it on the blue grass right next to the green grass

Open mushroom2 copy & paste to your image resize by 36% and place it on the other side of mushroom3

Open bird copy & paste to your image resize by 36% and place it on top of mushroom1

Open butterfly's copy & paste to your image resize by 75% and move it down slightly 

Open hourglass copy & paste to your image resize by 36% and place it on the right bottom of your mask

Open your tube or tubes of choice and copy & paste to your image resize as needed    and place  so that she sits on the green grass on the right

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Love Amore PTU

Love Amore

I used the wonderful poser called Amore by Designs by Norella which you must be licensed to use. You can purchase her tubes from PicsForDesign which can now be found here

I am using a scrapkit called Mi Amore by Michelle's Myths  which is PTU and can be purchased here

Mask of Choice 

Font of Choice

Plugin used was Xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper 9 from the scrapkit onto your new image resize by 144%  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element 23 and copy & paste to your image and move to the bottom right of your mask

Open  element 30 and copy & paste to your image and place it at the bottom right of your mask

Open  element 19 and copy & paste to your image and place it across the bottom right of your mask

Open  element 18 and copy & paste to your image  

Open  element 51 and copy & paste to your image and place it on the left side of your mask at the bottom

Open  element 17 and copy & paste to your image and place it in the bottom right corner of your mask   

Open  element 14 and copy & paste to your image and place it on the left side of your mask at the bottom

Open  element 39 and copy & paste to your image resize by 35%   

Open frame 8 and copy & paste to your image and place it in the top right corner of your mask take your magic wand using the following settings 

and click inside of your frame you made expand your selections with the 

following setting

 Open paper 7 copy and paste to your image  and hit selections invert delete move this layer 

under your frame do not deselect

Open your tube of choice  copy & paste it to your image resize if needed and move it so that the part of the tube you wish to keep is situated in the frame opening them hit delete go to selection select none 

Go to effects xero porcelain and apply with the following settings

Add a dropshadow of choice to the frame

Open  element 2 and copy & paste to your image and place it on the left top of your mask

Open  element 5 and copy & paste to your image  resize by 43% and place it in the bottom right corner of your image

Open your tube of choice copy & paste to your image resize as needed (I resized 20%) and place it on the left side on the of your  frame Add a dropshadow of choice 

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!