Tuesday, January 27, 2015

Muzic in Me PTU

Muzic is in Me
I used the cute artwork called Bubbles by Victoria Fox  which you must be licensed to use. You can purchase this tube from The PSP Project  which can now be found here 
I am using a awesome scrapkit called I Heart Muzik  which is PTU by Toxic Desirez and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used Gems Masks 189 which can be found here
Plugins used  Xero Porcelain
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper2 from the scrapkit onto your new image resize by 140% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 
Open wordart copy & paste to your image 
Open notesheart copy & paste to your image 
Open bars and copy & paste to your image resize by 73% and place 1/3 way up from the bottom of your mask
Open ampspeaker copy & paste to your image resize by 50% and place just below the left side of your bars so that it covers all but the top of the bars
Open ribbon copy & paste to your image  
Open crowd copy & paste to your image resize by 73%  and place across the bottom of your bars
Open sparkles copy & paste to your image  
Open speakers copy & paste to your image and place at the top of your image
Open doodles copy & paste to your image and place on top of your speakers
Open lights copy & paste to your image  resize by 94% and place on top of your speakers
Open musicalheart copy & paste to your image and place on top of the middle speaker
Open pianokeys copy & paste to your image resize by 75% and place between your crowd and the bottom of the wordart
Open bunny copy & paste to your image resize by 30% and place on the left end of the pianokeys
Open cupcake copy & paste to your image resize by 30% and place on right end of pianokeys
Open your tube of choice and copy & paste to your image resize as needed and so is on the keyboard
Open microphone copy & paste to your image resize by 30% and place behind the hand on your tube
Merge your image visible and go to xero porcelain and apply the following settings



Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

She Still Dances PTU

She Still Dances
I used the wonderful artwork called Ballerina by Enamorte which you must be licensed to use. You can purchase this tube from CDO  which can now be found here  
I am using a awesome scrapkit called Gothic Ballet which is PTU by Gimptastic Scraps and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used GemsMasks 192  which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper1 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 
Open swirl copy & paste to your image and place on the top of your mask
Open vine copy & paste to your image and place at the top middle of your mask duplicate x1 and move to the left of the original
Open candle and copy & paste to your image and place in the middle of the vines slightly down from the top
Open clock copy & paste to your image and place on the bottom of the candle covering the base
Open flower1 copy & paste to your image duplicate x1 and place in the top right corner of your mask side by side
Open feather copy & paste to your image and place so that the beginning of the feather is in the middle of your clock
Open fan copy & paste to your image and place just below the left bottom of the clock
Open frame4 copy & paste to your image and move to the top right corner of your mask covering half of the flowers Take your magic wand with the following setting
 and click inside your mask Then go to selections expand and expand with the following settings
 Copy and paste paper7 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open your tube and copy & paste to your image and place it inside your frame and position so that the part of the tube your want to show is inside the frame then hit delete go to selections select none Change your blend mode to overlay on your tube layer
Open jars copy & paste to your image and place in the bottom left of your tube over the bottom of the clock
Open hangingballetslippers copy & paste to your image and place on the rights top of your frame
Open chainedhearts copy & paste to your image and place in the middle left of your frame
Open book copy & paste to your image and place on the bottom of your frame 
Open featherjar copy & paste to your image and place in the right bottom corner of your book
Open meltingheart copy & paste to your image and place on the left side of your fan
Open balletslippers copy & paste to your image and place on top of the featherjar & book
Open cat copy & paste to your image and place in the middle next to balletslippers
Open your tube of choice and copy & paste to your image resize as needed and place on the melting heart 
Add a dropshadow of choice to your tube or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Sunday, January 18, 2015

Scandalous PTU

Scandalous
I used the wonderful artwork  by Enamorte which you must be licensed to use. You can purchase this tube from CDO which can now be found here  
I am using a awesome scrapkit called Scandalous Seduction which is PTU by Gimptastic Scraps and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used WeeScotslass WSL302 which can be found here
Plugins used Candyeye4000 Gradient Glow
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper10 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 
Open flower1 copy & paste to your image and place on the top left side of your mask
Open flower2 copy & paste to your image and place at the top left of your mask covering half of flower1 to the right
Open bullets and copy & paste to your image and place on the top part of your clock
Open skull2 copy & paste to your image and place on the left bottom next to the bullets
Open gun copy & paste to your image and place on top of the bullets & skull
Open bulletholes copy & paste to your image and place on the bottom left of your mask
Open spike copy & paste to your image and on the bottom right of your mask so that the end is off the mask
Open frame2 copy & paste to your image and move to the top left corner of your mask covering half of the flowers Take your magic wand with the following setting 

and click inside your mask Then go to selections expand and expand with the following setting

  Copy and paste paper5 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open up chalk outline and copy & paste to your image and move it so that the top of the body is in the upper right corner of the inside of your frame then hit delete Now open your tube of choice resize if needed flip horizontal and copy & paste to your image and place on the left side of your frame so that it just shows a profile hit delete Open chain curtain copy & paste to your image and place on the inside of your frame hit delete  Open your tube again and copy & paste to your image and place it inside your frame and position on the right so that only the face shows hit delete now hit selections none  
Open blood copy & paste to your image and position over your left tube place it under the frame at the top so that it looks like it is dripping down
Open Bible copy & paste to your image and place it to the right of your gun
Open WA2 copy & paste to your image and place on the right top corner of your image Go to effects Candyeye4000 gradient glow and apply the following settings


Open dagger copy & paste to your image and place on the bottom of your frame in the middle
Open crimetape copy & paste to your image and place across the your frame slightly down from the middle
Open couch copy & paste to your image and place on the right of your frame just above the bible
Open bloodtini copy & paste to your image and place next to the couch
Open charm copy & paste to your image and place to the left of the bloodtini
Open your tube of choice and copy & paste to your image resize as needed and place sitting on the couch
Open WA1 copy & paste to your image and place at the top of your frame slightly to the right Go to effect Candyeye4000 Gradient Glow and apply the same setting as above

Add a dropshadow of choice to your tube  or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

It isn't all Black & White PTU

It isn't all Black & White
I used the wonderful artwork called  Apt  by Jay E. Fife which you must be licensed to use. You can purchase this tube from The PSP Project  which can now be found here  
I am using a beautiful scrapkit called Millie which is PTU by Irish Princess Designs and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used WeeScotslass WSL362 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper5 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 
Open Element75 copy & paste to your image resize by 48% and place on the left side of your mask at the top
Open Element33 copy & paste to your image and place at the top right of your mask
Open Element45  and copy & paste to your image and place on the top part of your clock
Open Element46 copy & paste to your image 
Open Element37 copy & paste to your image and place it on the right side below the clock
Open Element81 copy & paste to your image and move to the top of the image
 Open Element97 copy & paste to your image and move to the top of your image
Open Element8 copy & paste to your image and place across the bottom of your image
Open Element24 copy & paste to your image resize by 18%  and place on the left bottom of your mask
Open your tube of choice and copy & paste to your image resize as needed  and place  in the middle of your image
Open Element43 copy & paste to your image and place on the bottom of your tube

Add a dropshadow of choice to your tube  or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Sunday, January 11, 2015

Urban Living PTU

Urban Living
I used the wonderful artwork called Blue by Poupee de Chair  which you must be licensed to use. You can purchase this tube from The PSP Project which can now be found here  
I am using a awesome scrapkit called Urban Chic which is PTU by Abstract Creations and can be found at The PSP Project here
Font of Choice  
Mask of Choice I used WeeScotslass WSL221 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper7 from the scrapkit onto your new image resize by 120% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 
Open e37 copy & paste to your image and place in the top left corner of your mask
Open e44 copy & paste to your image and place at the bottom of your mask on the left
Open e26 and copy & paste to your image duplicate and place one on the bottom of the star and one just below the first one and to the left
Open e33 copy & paste to your image and place in the bottom left corner of the mask
Open f1 copy & paste to your image resize by 75% and place in the top left corner of your mask so that the top part of the buildings show Take your magic wand with the following settings

 and click inside your frame then go to selections modify expand with the following settings

  Open paper2 copy & paste to your image make sure the inside of the frame in covered with the paper Go to selections invert then hit delete move this paper below your frame  Now take your tube of choice and copy & paste to your image resize as needed and place the part of the tube you want to show in the circle and then hit delete move this tube layer below your frame hit selections select none
Open e48 copy & paste to your image and place on the left side of your frame in the middle
Open e16 copy & paste to your image and place in the right bottom corner of your mask
Open e21 copy & paste to your image and place on the right side bottom of your mask
Open e43 copy & paste to your image and place between the bottle & your frame
Open e19 copy & paste to your image resize by 50% and place in the middle of the left side of your frame
 Add a dropshadow of choice to your tube frames or anything you would like to!

Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Selfies PTU

Selfies
I used the wonderful artwork of Keith Garvey which you must be licensed to use. You can purchase these tubes from Garv Girls PSP Tubes which can now be found here  
I am using a awesome scrapkit called Sassy Selfie which is PTU by Gimptastic Scraps and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used WeeScotslass WSL228 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper8 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 
Open webcam copy & paste to your image and place on the right side of your mask just slightly from the middle
Open monitor copy & paste to your image and place at the bottom of your mask on the left
Open flower3 and copy & paste to your image and place it in the middle top of your mask
Open makeupbrush copy & paste to your image and place in the middle of your monitor
Open lipstick copy & paste to your image and place it next to your makeupbrush
Open nailpolish copy & paste to your image and place it in front of your makeupbrush
Open mascara copy & paste to your image and place on the left of your nailpolish
Open frame3 copy & paste to your image resize by 50% and place in the top left corner of your mask
Take your magic wand with the following settings 

and click inside your frame then go to selections modify expand with the following settings

  Open paper4 copy & paste to your image make sure the inside of the frame in covered with the paper Go to selections invert then hit delete move this paper below your frame  Now take your tube of choice and copy & paste to your image resize as needed and place the part of the tube you want to show in the circle and then hit delete move this tube layer below your frame hit selections select none
Open frame2 and repeat all the directions above except use paper6 and you can use the same tube or a different one but remember must be from the same artist
Open frame5 and repeat all the same directions as above with the other frames except click inside all 3 frame openings and only expand 3 use paper9 and I used 2 different tubes to fill the areas.
Open cellphone copy & paste to your image and place in between your circle frame and 3 tier frame
Open bubbles copy & paste to your image and place so that the top bubble covers the tube in the circle heart 
Open glitter copy & paste to your image and place the top part across the bottom of your circle frame
Open star copy & paste to your image and place on the bottom right of your tier frame
Open your tube of choice and copy & paste to your image resize as needed and place  on the right side of your image on the left of the star
Open camera copy & paste to your image and place on the bottom of your tube (I used a tube with only half of the legs)
Open flash copy & paste to your image and place on top of your camera
Open tag copy & paste to your image and place below your circle frame
Open Ohyeah copy & paste to your image and place below your white frame
Add a dropshadow of choice to your tube frames or anything you would like to!

Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Thursday, January 1, 2015

Winter Fairy PTU

Winter Fairy
I used the wonderful artwork called Winter Frost by Carrie Hall which you must be licensed to use. You can purchase this tube from The PSP Project  which can now be found here  
I am using a beautiful scrapkit called Violet Winter which is PTU by Tasha's Playground and can be found at The PSP Project here  
Font of Choice  
Mask of Choice I used WeeScotslass WSL218 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper5 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)
In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer
merge merge group. 

Open flower circle copy & paste to your image and place at the top of your mask on the left
Open wheel and copy & paste to your image and place on the bottom left of your mask
Open tree copy & paste to your image and place on the top right of your mask
Open frame3 copy & paste to your image  Take your magic wand with the following setting 
and click inside the frame and go to selections modify expand with the following settings 
Open paper4 copy & paste to your image and place the part of the paper you want to use inside the frame then hit selections invert delete move the paper below your frame
Open lights copy & paste to your image and place across the top of the frame
Open flower4 copy & paste to your image and place in the top left corner of the mask
Open your tube of choice and copy & paste to your image resize as needed (I resized by 75%) and place  so that she is on the bottom of the frame
Open tree2 copy & paste to your image and place on the right of your frame
Open snowflakes copy & paste to your image and place in the top left of your image
Open branch copy & paste to your image duplicate x1 and place them across the bottom of your frame and tube
Open snowflake1 copy & paste to your image and on the top part of your frame
Open leaves copy & paste to your image and place across the top of your mask
Open lantern copy & paste to your image resize by 75% and place on the left side of your mask at the bottom
Add a dropshadow of choice to your tube frame or anything you would like to!

Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!