Amour de Paris PTU

Amour de Paris

I used the wonderful artwork called Wishful Thinking by Jasmine Becket-Griffith which you must be licensed to use. You can purchase this tube from CDO which can be found here  

I am using a beautiful scrapkit called Amour de Paris which is PTU by Gimptastic Scraps and can be found at CDO here  

Font of Choice  

Mask of Choice I used DBV Mask111 which can be found here

Effects used candy eye4000 gladient glow

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper8 from the scrapkit onto your new image resize by 140% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 

Open ele14 copy & paste to your image  

Open ele16 copy & paste to your image and place on the left side of ele14 placing the bottom in the middle of the element 

Open frame5 copy & paste to your image Flip horizontal and place in the lower left corner of your image Take your magic wand and click inside the opening with the following setting 

and then go to selections modify expand with the following setting

Open paper3 copy & paste to your image and go to selection invert then hit delete (do not deselect)  Open your tube of choice and copy & paste to your image resize as needed and place the part you want to show in the frame then hit delect go to selection select none Go the adjust colorize and change the tube color to gray  Add a dropshadow of vert 1 horiz 1 Opacity 55 blur 12 color black to the frame  

Open ele34 and copy & paste to your image and place in the bottom left of the frame so that it ends by the opening in the frame

Open ele35 copy & paste to your image and place on the stem end of your leave add the same dropshadow you used above

Open ele32 copy & paste to your image and place on the left side next to the tower

Open ele42 copy & paste to your image and place on the bottom of the rose

Open ele11 copy & paste to your image resize by 94% and place in the top left corner of the frame

Open ele27 copy & paste to your image and place in the middle right of the frame

Open ele38 copy & paste to your image and place on the gray rose bottom

Open frame3 copy & paste to your image and place in the upper right corner of your image Take your magic wand and click inside the opening with the same setting as above and then go to selections modify expand with the same setting as above Open your tube of choice and copy & paste to your image resize as needed and place the part you want to show in the frame then hit delect go to selection select none  Add a dropshadow of vert 1 horiz 1 Opacity 55 blur 12 color black to the frame  

Open ele5 copy & paste to your image and place across the bottom of the paint brushes

Open ele1 copy & paste to your image and place on top the the first frame above the opening

Open ele31 copy & paste to your image and place the top of the key in the middle right of the black frame

Open word art 1 copy & paste to your image and place in the top left corner of your image go to effect candy eye4000 gladient glow width3 and color to fat but change white to one of the greens in the tag hit apply then go add a dropshadow with the same settings as above

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Colorful Past PTU

Colorful Past

I used the wonderful artwork called Princess Dragon which is an exclusive you must be licensed to use. You can purchase this tube from PicsForDesign which can now be found here  

I am using a awesome scrapkit called Colourful World which is PTU by Creative Crazy Scraps and can be found at CCS here  

Font of Choice  

Mask of Choice I used DBV mask113 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper3 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element5 copy & paste to your image and place on the left side top of your mask

Open element7 copy & paste to your image and place on the left side of the castle

Open element33 copy & paste to your image and place in front of the right tower on the castle

Open element6 copy & paste to your image and place in the top right of your mask

Open element31 copy & paste to your image duplicate x1 and place one at the bottom of your castle and on at the bottom of the mask on the right side

Open element2 copy & paste to your image and place on the top right ledge on your castle

Open element1 copy & paste to your image and place to the left of the bottom area of grass

Open element3 copy & paste to your image and place in the middle of the sword

Open element16 copy & paste to your image duplicate x2 and place across the area to the left of the bottom grass

Open element46 copy & paste to your image and place on the right side of the bottom grass

Open element8 copy & paste to your image and place so that the flower if just above the suit of armor

Open element10 copy & paste to your image and place in the top right corner of your mask

Open element32 copy & paste to your image and place to the left of your suit of armor

Open element11 copy & paste to your image and place next to the top of your castle

Open element15 copy & paste to your image and place between your bottom yellow flower and the top yellow flower free rotate 21 to the right

Open your tube of choice copy & paste to your image resize as needed Add a dropshadow of vertical - 1 horizontal 1 Opacity - 55 blur - 12 color black

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

I am Forgotten PTU

I am Forgotten

I used the wonderful artwork called Dark Intent by Kurama Phoenix which you must be licensed to use. You can purchase this tube from CDO which can now be found here

I am using a awesome scrapkit called Forgotten which is PTU by Gimptastic Scraps and can be found at CDO here  

Font of Choice  

Mask of Choice I used Gems Mask 189 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper3 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element38 copy & paste to your image and place on the top middle of your mask

Open element50 copy & paste to your image and place at the middle of your mask on the right

Open element2 copy & paste to your image and place on top of the bookcase

Open element19 copy & paste to your image and place in the bottom left corner of your mask

Open element15 copy & paste to your image and place above your red bottle with the bottom of the keys on the top of the bottle

Open element9 copy & paste to your image and place in the left top of the mask and free rotate left by 21

Open element28 copy & paste to your image and place in the middle left of your mask

Open element10 copy & paste to your image and place on the bottom of the rose

Open element3 copy & paste to your image and place on the right side bottom of the bookcase

Open element47 copy & paste to your image and place on the right side of the pile of books

Open element17 copy & paste to your image and place on the bottom of your leaves

Open element6 copy & paste to your image and place on the bottom of the violin

Open element25 copy & paste to your image and place in the middle bottom of the mask

Open element26 copy & paste to your image and place on the right side of the fan

Open your tube of choice (mine had 2 sizes and I used the smaller one here) and place in the middle of your bookcase

Open element7 copy & paste to your image and placeon top of the sheet of music and below the rose

Open your tube again (I used the larger one this time) and place in the middle of your image

Open element48 copy & paste to your image duplicate x1 and place across the bottom of the cage

Open wordart copy & paste to your image and place across the bottom of the image between the flower on the left and the rose on the right

I added a dropshadow with the following settings vert 10 horiz 10 opacity 50 blur 5 color black to the middle tube the wordart and the violin

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

When Darkness Falls PTU

When Darkness Falls

I used the wonderful artwork called Serpientia by Alehandra Vanhek which you must be licensed to use. You can purchase this tube from PicsForDesign which can now be found here  

I am using a awesome scrapkit called Dark Beginnings which is PTU by Creative Crazy Scraps and can be found at CCS here  

Font of Choice  

Mask of Choice I used GemsMasks 192 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.

Open element17 copy & paste to your image and place at the top left of your mask 

Open Element34 copy & paste to your image and place on the bottom middle of your mask add a dropshadow of vert10 horiz10 opacity50 blur5 color black

Open Element40 copy & paste to your image and place so that the top of the candle is above the clock between the 1 & 2

Open Element6 copy & paste to your image and move slightly to the left

Open Element27 copy & paste to your image and place in the bottom left corner just below the tower

Open Element23 copy & paste to your image and place on the bottom of the tower add a dropshadow of vert10 horiz10 opacity50 blur5 color black

Open Element37 copy & paste to your image and place in the middle of the tower

Open Element26 copy & paste to your image and place on the right side of the purple leave

Open Element36 copy & paste to your image and place on the top part of the rose

Open element24 copy & paste to your image and place between the rose and the other flower on the top part of the leave

Open element30 copy & paste to your image and place on top of the other flowers

Open element20 copy & paste to your image and place on the bottom left corner and free rotate by 21 right

Open element11 copy & paste to your image and place in the right top corner of your mask

Open element13 copy & paste to your image and place just below element 11

Open element18 copy & paste to your image and place in the bottom right corner of your image

Open element25 copy & paste to your image and place between the dark clouds and the feather on the right of your image

Open element39 copy & paste to your image and place on the top right of the tower and free rotate by 21 left

Open your tube of choice copy & paste to your image resize as needed and place on the right side of your image add a dropshadow of vert10 horiz10 opacity50 blur5 color black

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Off to Wonderland PTU

Off to Wonderland

I used the wonderful artwork called Alice by Victoria Fox which you must be licensed to use. You can purchase this tube from The PSP Project which can now be found here  

I am using a awesome scrapkit called Wonderland which is PTU by Abstract Creations and can be found at Abstract Creations here  

Font of Choice  

Mask of Choice I used WSL Mask116 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Plugins used Candy Eye4 Gladient Glow

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is 

smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for 

placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper7 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open e60 copy & paste to your image and place at the top right of your mask 

Open e16 copy & paste to your image flip horizontal and place one on the right side bottom of your mask

Open e42 copy & paste to your image and place on the right middle of your mask so that the bottom right starts at the rabbits feet

Open e52 copy & paste to your image and place at the bottom of your fence

Open e12 copy & paste to your image and place on the left side of your mask slightly up from the bottom

Open e38 copy & paste to your image and place on the left bottom corner of your mask

Open e29 copy & paste to your image and place in the top left corner of your mask change the opacity to 55%

Open e34 copy & paste to your image and place at the bottom of your grass rock

Open e2 copy & paste to your image and place in the middle of the grass rock

Open e1 copy & paste to your image and place to the left of your blue mushrooms

Open e31 copy & paste to your image and place between the jug & the other red mushrooms

Open e30 copy & paste to your image and place on top of the blue mushrooms

Open e51 copy & paste to your image and place across the bottom part of your grass

Open e23 copy & paste to your image resize by 48% and place on the top of the right end of the cards

Open e6 copy & paste to your image and place so that the circle part is around the rabbit's head Then go to effects candy eye 4 gladient glow and change the width to 3 and color to fat and apply to the wordart

Open e4 copy & paste to your image flip horizontal and place on the bottom right of your mask

Open your tube of choice copy & paste to your image resize as needed and place on the left side of your image

Add a dropshadow of choice to your tube  or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Spring into Beautiful PTU

Spring into Beautiful

I used the wonderful artwork called Little Flower Tube Pack by Arthur Crowe which you must be licensed to use. You can purchase this tube from Arthur Crowe Factory which can now be found here  

I am using a awesome scrapkit called Spring House which is PTU by Creative Crazy Scraps and can be found at CCS here  

Font of Choice  

Mask of Choice I used gems mask 45 & 52 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper7 from the scrapkit onto your new image and apply your mask of choice.(I used mask 52) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Copy & paste paper8 from the scrapkit onto your new image and apply your mask of choice.(I used mask 45) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element20 copy & paste to your image and place on the left side of your masks

Open element29 copy & paste to your image and place at the top in the middle next to the top paper

Open element27 copy & paste to your image and place at the top right next to the orange flower 

Open element21 copy & paste to your image and place at the top right of your mask 

Open element15 copy & paste to your image and place in the middle bottom of your mask

Open element42 copy & paste to your image resize by 75% and place at the bottom of your masks

Open element37 copy & paste to your image and place at the bottom left of your masks

Open element10 copy & paste to your image flip horizontal and place at the top left of your mask 

Open element36 copy & paste to your image and place at the bottom of the tag in the middle

Opem element13 copy & paste to your image and place to the right of your owl

Open element6 copy & paste to your image and place in the top right of your mask Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper9 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame  do not deselect  Open your tube and copy & paste to your image resize as needed  and place it inside your frame and position so that it is on the right side of the frame  I then opened another tube and place it on the right side of the frame and changed the blend mode to multiply hit delete on each of the tube layers and them selections select none

Open element39 copy & paste to your image and place on the bottom of the orange 3 paper element

Open element3 copy & paste to your image duplicate x1 and place in the bottom left of your mask side by side

Open element46 copy & paste to your image and place on the bottom right of your image

Open element12 copy & paste to your image resize by 50% and place on the top of the birdhouse

Open your tube of choice copy & paste to your image resize as needed and place on the left bottom of your image  

Add a dropshadow of your choice to the frame, tube and any other element your want!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Gothic Death PTU

Gothic Death

I used the wonderful artwork called Death Lover 3 by Di Halim which you must be licensed to use. You can purchase this tube from Scraps N Company which can now be found here 

I am using a awesome scrapkit called Gothic Days which is PTU by Creative Crazy Scraps and can be found at CCS here  

Font of Choice  

Mask of Choice I used DBV mask110 & 111 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper6 from the scrapkit onto your new image and apply your mask of choice.(I used mask 111) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice.(I used mask 110) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element42 copy & paste to your image and place on the bottom of your masks

Open element23 copy & paste to your image and place at the top right of your mask 

Open element9 copy & paste to your image and place at the top right of your masks

Open element36 copy & paste to your image and place at the top right of your mask 

Open element43 copy & paste to your image and place in the middle left of your masks

Open element17 copy & paste to your image and place at the bottom left of your masks

Open element22 copy & paste to your image and place at the bottom left of your masks

Open element45 copy & paste to your image and place at the top left of your mask 

Open element19 copy & paste to your image and place inside on the bottom of element22

Open element50 copy & paste to your image and place in the top left of your mask Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper7 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame  do not deselect  Open your tube and copy & paste to your image resize as needed  and place it inside your frame and position so that the part of the tube your want to keep is inside the frame then hit delete go to selections and select none

Open element1 copy & paste to your image and place on the bottom middle of your frame

Open element7 copy & paste to your image and place in the bottom right of your mask

Open element35 copy & paste to your image and place in the middle of element7

Open element32 copy & paste to your image and place on the top right of element7

Open your tube of choice copy & paste to your image resize as needed and place on the right of your image so that the bottom is across the bottom of the first element you placed

Open element 29 copy & paste to your image and place just to the left of the bottom of your tube

Add a dropshadow of your choice to the frame, tube and any other element your want!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!