Hello It's Halloween FTU

Hello It's Halloween

I used the wonderful artwork of Kristie Silva which

you must be licensed to use. I purchased from Artistically

Inclined Licensing Which can now be found here

I am using a which is now a ftu scrapkit 

called Halloween   

that you can find on Scrappy Bit of Fun blog here.

Font of Choice  

Mask of Choice I used Agua Rebel315 Designs these masks are Here 

(look on the lefthand side of her blog for her mask links)

Plugins used: Candy Eye 4000 gladient glow (if you don't have just add

your own touch)

Note When I resize I use these settings: (make sure that

pixel dimensions is on percent and in advanced setting

it is smart size lock aspect ratio is checked and resize all layers

is unchecked) also please save often and for placement on the tag you

can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background.

Open a new raster layer and floodfill with the a color from your

tube of choice (I used the red in her eyes) apply your mask

of choice. (Click layers, load save mask,

make sure fit to canvas, source luminance 

and hide all mask is checked then click load)

In layers right click on mask hit delete and answer 

yes to the popup. Now right click on group layer

merge merge group.  Resize by 105%

and now for the second mask (same mask just not resized) 

Copy & paste paper8 from the scrapkit 

onto your new image and apply your mask

of choice. (Click layers, load save mask,

make sure fit to canvas, source luminance 

and hide all mask is checked then click load)

In layers right click on mask hit delete and answer 

yes to the popup. Now right click on group layer

merge merge group.  

Open up element #8 copy & paste onto you image and use candy eye

4000 gladient glow with the following settings

Open up element #21 copy & paste onto your image and resize by 80%

Open up element #26 copy & paste onto your image and resize by 62%

and place in the lower righthand corner of your mask

Open up element #4 and copy & paste onto your image resize by 80%

Open up element 24 and copy & paste onto your image resize by 50%

and place it by the left side of the tree roots

Open up your tube of choice and copy & paste to your image

Resize to fit and position of your choice.

Add your copyrites and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is wrong!! 

Be Creative as you want!

Festive Fall FTU

Festive Fall

I used the wonderful artwork of Elias which

you must be licensed to use. I purchased this tube when

he was with PTE but he  can now be found here

I am using a which is now a ftu scrapkit 

called Fab Fall  

that you can find on my blog here.

Font of Choice (I used Angelina)

Mask of Choice I used a mask from True Taggin Love

TTL Mask 1-1 Here 

Note When I resize I use these settings: (make sure that

pixel dimensions is on percent and in advanced setting

it is smart size lock aspect ratio is checked and resize all layers

is unchecked) also please save often and for placement on the tag you

can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background. 

Copy & paste paper2 from the scrapkit 

onto your new image and apply your mask

of choice. (Click layers, load save mask,

make sure fit to canvas, source luminance 

and hide all mask is checked then click load) or if

you use and image use the following setting

In layers right click on mask hit delete and answer 

yes to the popup. Now right click on group layer

merge merge group.

Open grass and copy & paste on your image and position it at the bottom

of your mask

Open Flower2 in your scrap and copy & paste to your image

position it up in the righthand top corner of your tag  

Open flower3 in your scrap and copy and paste to your image

Open flower in your scrap and copy and Paste to your image and

position just over the left hand side of flower3 (see tag example)

Open Candles in your scrap and copy and paste to your image resize

by 72% and move down to the lefthand side of your mask

Open butterfly2 and copy & paste to your images resize by 35% and position it just above you large

on your candle (see tag)

Making sure the butterfly layer is highlighted duplicate and position in

the lefthand corner by the large pom flower

Open your tube of choice and copy & paste onto your image and position

it on the righthand side of your tag and add a dropshadow with the 

following settings:

Add your copywrite and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is wrong!! 

Be Creative as you want!

Flower Fairy FTU

Flower Fairy

This tut was created in Corel Paintshop Pro X4

Plugins used: none

I used the wonderful artwork of Joel Adams which

you must be licensed to use. I purchased from CDO Which

can now be found here

I am using a ftu scrapkit called  Curious by Simone 

that you can find on Scrappy Bit of Fun blog here.

Font of Choice  

Mask of Choice I used WSL254  these masks are Here 

Note When I resize I use these settings: (make sure that

pixel dimensions is on percent and in advanced setting

it is smart size lock aspect ratio is checked and resize all layers

is unchecked)

also for placement on the tag you can always refer to the example tag

if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background. 

Copy & paste paper6. from the scrapkit 

onto your new image and apply your mask

of choice. (Click layers, load save mask,

make sure fit to canvas, source luminance 

and hide all mask is checked then click load)

In layers right click on mask hit delete and answer 

yes to the popup. Now right click on group layer

merge merge group.

Open background 04 and copy & paste onto your image

Open frame 004 and copy & paste onto your image and resize to

by 85%

Open your tube of choice using the largest image on the tube 

copy and paste to image and place just below the frame so

that whatever part of the tube you want showing is inside

the frame

Grab your magic wand and click inside the frame than go to selections

modify expand by 5 click okay selections again invert make sure that 

your tube layer is highlighted on layers then hit delete selections-select 

none keeping the tube layer highlighted go to normal at the top of the

layers and change that to hard light. 

Open flower008 and copy & paste onto your image flip horizontal move to 

the righthand size of your mask

Open flower 012 and copy & paste onto your image resize by 92%

and move to the bottom of your mask.

Open your tube and use the full image copy & paste to your image flip horizontal 

and place just to the right of your frame

Copy and paste flower004 and place it so the middle flower is at the 

top of the heart frame.

Add your copyrights and name of choice save your tag and you are finished!!

I hope you liked this tut and please let me know it anything is wrong!! 

Be Creative as you want!

A Bit of Spunk FTU

A Bit of Spunk

This tut was created in Corel Paintshop Pro X4
Plugins used  none

I used the wonderful artwork of Anna Liwanag which

you must be licensed to use. I purchased from CDO Which

can now be found here

I am using a which is now a ftu scrapkit 

called Girls Rule 

that you can find on Amy & Leah's Gimptastic Tuts blog here.

Font of Choice (Cherry Cream Soda)

Mask of Choice I used WSL 3 Her masks are Here 

Note: When I resize I use these settings: (make sure that

pixel dimensions is on percent and in advanced setting

it is smart size lock aspect ratio is checked and resize all layers

is unchecked) and also please remember to save your work often!

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background. 

Copy & paste paper6. from the scrapkit 

onto your new image and apply your mask

of choice. (Click layers, load save mask,

make sure fit to canvas, source luminance 

and hide all mask is checked then click load)

In layers right click on mask hit delete and answer 

yes to the popup. Now right click on group layer

merge merge group.  

Open Frame 1 and copy & paste onto your image

Open stars and copy & paste onto your image and move up so that the

point is just onto frame 1

Open starSpiral from your scrap and copy & paste onto

your image.

Go back to your scrapkit and open MeshStar, copy &

paste onto your new image and position in the left hand top

corner of your mask. add a dropshadow EFFects-drop shadow vert1 horz-1

opacity 45 blu 5 color black

Open Mesh and copy & paste onto your new image and position

it at the bottom of he mask and add same dropshadow

open wingedskull and copy & paste onto your tag and place

it in the righthand top corner of your mask.

Go back to your scrapkit and open Frame 3, copy &

paste onto your new image.

Now grab your magic wand set on Mode-add shift match mode-RGB Value

anti alias checked and click inside the frame make sure to click in 

the small areas also Copy & paste paper7 onto your tag  

go to selection invert (make sure this layer is highlighted on layers) 

and hit delete move this layer below your frame hit selections select 

none

Open your tube copy & paste onto your image and dupicate once twice

(hide one of them for later use)

Move the other 2 into the 2 outside circles of your frame (see example

tag for placement) and move just under the frame ontop of the paper layer

flip the one on the lefthand side horizonal (click Image flip horizontal)

now take your eraser tool (setting round size 32) and erase all of the tube

on both that hangs below the frame (see example)

Highlight your tube layer on the left side and click the normal button at 

the top of layers and change it to overlay and repeat this on the right

side

OPen kiss and copy and paste and place it in the center frame

Open shoe and copy & paste on your new image and position it

in the righthand corner of the mask

Open sodapop copy & paste on your image and position it by the

toe of the shoe

Now unhide your extra tube layer and position it in the center of your tag

and add a dropshadow of choice

Add your copywrites and name of choice, save your tag and you are finished!!

I hope you liked this tut and please let me know it anything is wrong!! 

Be Creative as you want!