Punky Pink PTU

Punky Pink
I used the wonderful artwork called Little Bit Pink by The Caron Vinson which you must be licensed to use. You can purchase this tube from CDO which can be found here 
I am using a beautiful matching scrapkit which is PTU by Gimtastic Scraps and can be found at CDO here 
Font of Choice 
Mask of Choice I used Moonbeams & Spiderwebs #68 & 83 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.
Copy & paste paper2 from the scrapkit onto your new image and apply your mask of choice.(I used #83) Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open frame 1 copy & paste to your image
Copy & paste paper3 from the scrapkit onto your new image and apply your mask of choice.(I used #68) Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open ele6 copy & paste to your image and place at the right top of your image
Open ele21 copy & paste to your image and place on the right top of your image
Open ele22 and copy & paste to your image and place in the bottom right corner of the image
Open frame2 copy & paste to your image Take your magic wand and click inside with the following setting and then go to selections modify expand with the following setting
Open paper5 copy & paste to your image and go to selection invert then hit delete selections none Open ele20 copy & paste to your image and place on the left side of your paper under your frame  Open your tube of choice and copy & paste to your image resize as needed and place so that the bottom of the tube is even with the frame Add a dropshadow of vert 1 horiz 1 Opacity 55 blur 12 color black to the frame and the tube
Open wordart copy & paste to your image and place on the bottom right side of your frame
Open ele19 copy & paste to your image and place in the bottom left corner of your image 
Open ele3 copy & paste to your image resize by 50% and place in the top left corner of your frame
Open ele18 copy & paste to your image and place on the right side of your frame
Open ele9 copy & paste to your image and place on the right bottom of your frame


Add your copyrights and name of choice and you are finished!!


I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Waiting in Silence PTU

Waiting in Silence
I used the wonderful artwork called Reine by Nocturne which you must be licensed to use. You can purchase this tube from PicsForDesign which can now be found here 
I am using a awesome scrapkit called Silent Secret which is PTU by Creative Crazy Scraps and can be found at CCS here 
Font of Choice 
Mask of Choice I used WSL220 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper4 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element23 copy & paste to your image and place on the right side top of your mask
Open element22 copy & paste to your image and place to the left of your first flower
Open element25 copy & paste to your image and place so that the first set of leaves are in the middle top of your mask
Open element59 copy & paste to your image and place in the middle of your first flower
Open element58 copy & paste to your image and place between the flower you just placed and the leaves on the right
Open element51 copy & paste to your image and place on the very tip of the leave furthest to the left
Open element41 copy & paste to your image and place to the left of the flower you just placed
Open element27 copy & paste to your image and move up just slightly
Open element46 copy & paste to your image and place in the top left of your mask
Open element60 copy & paste to your image and place in the bottom right of your mask
Open element42 copy & paste to your image and place in the top left corner of your mask so that the flowers show above the roof
Open element18 copy & paste to your image and place in the top right corner so the that the flowers frame the outside add a dropshadow with the same settings above
Open element31 copy & paste to your image and place so that the top starts at the four on the clock
Open element5 copy & paste to your image and place across the bottom of your mask
Open element48 copy & paste to your image and place across the bottom of your mask
Open element42 copy & paste to your image and place across the clock
Open element44 copy & paste to your image and move down slightly
Open your tube of choice copy & paste to your image resize as needed Add a dropshadow of vertical - 1 horizontal 1 Opacity - 55 blur - 12 color black
Open element9 copy & paste to your image and place in the middle bottom of your mask
Open element57 copy & paste to your image and place next to the feather
Open element 16 copy & paste to your image and place between cup & feather
Open element24 copy & paste to your image resize by 50% and place in the bottom right corner of your image
If your would like to change it up you can hide all the layers from the top to the tube layer and then merge visible the remaining layers and add a effect to the layer I added xero porcelain with the following settings

I then hide this layer opened up all the layers above the tube but not the tube merge visible and added the same settings to that layer Then open up your bottom & tube layers

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Alice's Bright Intentions PTU

Alice's Bright Intentions
I used the wonderful artwork called Alice by Laguna which you must be licensed to use. You can purchase this tube from PicsForDesign which can now be found here 
I am using a awesome scrapkit called Bright Intentions which is PTU by Crazy Creative Scraps and can also be found at CCS here 
Font of Choice 
Mask of Choice I used WSL350 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.
We will be making a forum set, tag & timeline set

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Tag
Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper1 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open ele13 copy & paste to your image and place in the bottom right corner of your mask
Open ele9 copy & paste to your image and place on the right side middle of your mask
Open ele14 copy & paste to your image and place on the bottom of your leave
Open fra3 copy & paste to your image Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper8 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open your tube and copy & paste to your image resize as needed (I used the biggest size in this tube) and place it inside your frame and hit delete Change the blend mode on the tube to multiply
Open ele33 copy & paste to your image and place on the bottom middle of the frame
Open ele3 copy & paste to your image and place on the left side of your cup
Open ele29 copy & paste to your image 
Open ele28 copy & paste to your image and place on the bottom of your image
Open ele4 copy & paste to your image and place in the top right of your image go to image free rotate and rotate right by 13 Add a dropshadow of vertical 1 horizontal 1 opacity 55 blur 12
Open ele32 copy & paste to your image and place on the left bottom of your image
Open ele12 copy & paste to your image and place on the pink flower add a dropshadow with the same settings as above
Open ele11 copy & paste to your image and place on the top part of your frame
Open your tube of choice resize as needed and place on the left side of your frame 
Open ele25 copy and paste to your image and place across the bottom of your tube
Add your copyright and name of choice and you are finished your tag

Forum Set and Timeline Set
Open a new image 851 x 315 (To help with placement you can look at the tag)
Open paper8 copy & paste to your image
Open ele29 copy & paste to your image 
Open ele9 copy & paste to your image Move to the bottom right corner so that half is not showing
Open ele32 copy & paste to your image and move all the way to the left so that the very right side is not showing
Open ele33 copy & paste to your image and move to the bottom of the image in the middle so that only the top of the cup shows
Open ele28 copy & paste to your image and move just slightly to the left and to the bottom
Open ele11 copy & paste to your image and move to the very top left corner of your image so that the purple flower is in the corner
Open ele3 copy & paste to your image and place on the top of the cup
Open ele4 copy & paste to your image and place to the right of the purple flower go to image free rotate and rotate to the right by 13 add a dropshadow the same as on the above tag
Open ele12 copy & paste to your image flip horizontal and add a dropshadow
Open your tube of choice resize as needed (I also used an element that came with the tube a clock) and place on the left side of your image with the parts of the tube your which to show
Open a new layer and go to selections select all In selections again modify  Select selection border number 6 Go to your flood tool and pick a color from your image and floodfill your border  Selection select none You can add noise to the border if your like
Add your copyright and name of choice
Duplicate your image (shift d) and go to resize image and use the following to resize  

This will make it the right size to use in a forum set

Avatar
Open a new image 180 x 180 Open pap2 and copy & paste to your image
Open ele9 copy & paste to your image and place on the bottom right corner so that the blue flower shows
Open you tube of choice resize as needed and flip is needed and place the part you want to show on the left side of your image
Open a new layer and go to selections select all In selections again modify  Select selection border number 4 Go to your flood tool and pick a color from your image and floodfill your border  Selection select none You can add noise to the border if your like
Add your copyright and name of choice
Duplicate your image (shift d) and go to resize image resize to 150 x 150 pixels  This will make it the right size to use in a forum set


And now you have a complete set
 

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Memories PTU

Memories
I used the wonderful artwork called Sonia by Verymany which you must be licensed to use. You can purchase this tube from PicsForDesign which can now be found here 
I am using a awesome scrapkit called Memories of Love which is PTU by Creative Crazy Scraps and can be found at CCS here 
Font of Choice 
Mask of Choice I used WSL362 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!


Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element12 copy & paste to your image and place on the left side of your image in the middle of the mask  Add a dropshadow of vertical - 1 horizontal 1 Opacity - 55 blur - 12 color black
Open element3 copy & paste to your image and place at the top middle of your mask
Open element54 copy & paste to your image and place on the right top of your mask
Open element1 copy & paste to your image and place just below your leaves on the left
Open element5 copy & paste to your image and place above your leaves on the left duplicate and move the duplicate to the left and place just below the tan heart
Open element7 copy & paste to your image and place right in the middle of the last 3 elements
Open element16 copy & paste to your image and place on the right top corner of your mask duplicate and place just below the first one
Open element17 copy & paste to your image and place between you first 2 flowers duplicate and place the on the left of the first flower
Open element10 copy & paste to your image and place just below the bottom of your heart on the left
Open element11 copy & paste to your image and place across the top of your alarm clock
Open element38 copy & paste to your image and place in the top left corner of your mask add a dropshadow with the same settings above
Open element18 copy & paste to your image and place in the top right corner so the that the flowers frame the outside add a dropshadow with the same settings above
Open element31 copy & paste to your image and place so that the top starts at the four on the clock
Open element5 copy & paste to your image and place across the bottom of your mask
Open element48 copy & paste to your image and place across the bottom of your mask
Open element42 copy & paste to your image and place across the clock
Open element44 copy & paste to your image and move down slightly
Open element35 copy & paste to your image and place to the left of your lamp
Open element33 copy & paste to your image and place in the center of your black heart
Open element 32 copy & paste to your image and place in the bottom right of your image
Open your tube of choice copy & paste to your image resize as needed and place on the right side bottom of your image Add a dropshadow with the same settings as above

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!