Promises PTU

Promises

I used the wonderful artwork  by Jasmine Becket-Griffith which you must be licensed to use. You can purchase this tube from CDO  which can now be found here  

I am using a awesome scrapkit called Promises which is PTU by Gimptastic Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used GemsMasks189 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper2 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open crochetdoily copy & paste to your image and place on the top left side of your mask

Open bouquet copy & paste to your image and place at the top right of your mask  

Open leaf2 and copy & paste to your image and place just below your bouquet

Open leaf1 copy & paste to your image and place on the left top of your mask

Open chair copy & paste to your image and place on right bottom side of mask

Open frame4 copy & paste to your image  Take your magic wand with the following setting and click inside your mask Then go to selections expand and expand with the following settings  Copy and paste paper4 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open your tube of choice and copy & paste to your image Using your magic wand with the same setting as above click anywhere on your image (make sure you are on your tube layer) then click selections invert selections float selections defloat Take you eraser tool and then click on your frame layer and erase any part of the frame that you want your tube to show then hit selection select none 

Open seeds copy & paste to your image and place on the bottom of your frame next to the left part of the opening

Open bows copy & paste to your image and place on the chair

Open key copy & paste to your image and place on the right side of seeds 

Open tin copy & paste to your image and place on the left of your frame

Open box copy & paste to your image and place next to the key

Open flowers copy & paste to your image and place on the bottom of the chair

Open dressform copy & paste to your image and place next to the couch

Open charm copy & paste to your image and place to top of the tin

Open jar copy & paste to your image and place between seeds and dressform

Open promises copy & paste to your image and place across the top above the frame

Open pearls copy & paste to your image and place across the bottom of your image

Add a dropshadow of choice to your tube, frame, key or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Cafe Addiction PTU

Cafe Addiction

I used the wonderful artwork by Gabi Spree which you must be licensed to use. You can purchase this tube from The PSP Project  which can now be found here  

I am using a awesome scrapkit called Got Java which is PTU by Wicked Ptincess Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used WeeScotslass WSL218 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper7 from the scrapkit onto your new image resize by 124% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group.

Open beans copy & paste to your image and place at the top of your mask 

Open flower copy & paste to your image duplicate x1 and place one on each side of your mask

Open grass copy & paste to your image resize by 76%  and place on the bottom of your mask

Open candle2 copy & paste to your image resize by 40% and place just slightly from the middle to the right below the grass (see image to help on placement)

Open basket copy & paste to your image resize by 40% and place on the left bottom of your mask

Open bowl copy & paste to your image resize by 40% and place on the left side of the basket

Open coffee copy & paste to your image resize by 40% and place between candle & basket

Open coffee2 copy & paste to your image resize by 40% and place on the right of your candle

Open apples copy & paste to your image resize by 40% and place next to coffee2

Open frame7 copy & paste to your image Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper13 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open your tube and copy & paste to your image resize as needed (I resized 50%) and place it inside your frame and position on the left  Open wall copy & paste to your image  Open vase2 copy & paste to your image resize by 76% and place at the end of the table on the tube Open you eraser tool and carefully erase all parts of the vase outside of the inner frame Open tag4 copy & paste to your image resize by 40% and place in the upper right corner of the frame 

Add a dropshadow of choice to your tube  or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Asian Beauty PTU

Asian Beauty

I used the wonderful artwork called Lotus by Angie Monasterio which you must be licensed to use. You can purchase this tube from The PSP Project  which can now be found here  

I am using a awesome scrapkit called Asian Tea House which is PTU by Gemini Creationz and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used WeeScotslass WSL60 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper12 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 

Open frame1 copy & paste to your image resize by 71% and move to the top right corner of your mask  Take your magic wand with the following setting and click inside your mask Then go to selections expand and expand with the following settings  Copy and paste paper5 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame do not deselect  Open your tube and copy & paste to your image and place it inside your frame and position so the part of the tube your want to show is inside the frame hit delete now hit selections none  Change the blend mode on your tube to hard light

Open tree copy & paste to your image resize by 71% and place on the top left side of your mask

Open screen copy & paste to your image and place on the left side of your mask so that the top part of the tree shows

Open ricebowl and copy & paste to your image resize by 50% and place at the bottom right of your frame

Open flower3 copy & paste to your image resize by 40% and place between the bowl & screen

Open stickbundle copy & paste to your image and place below the ricebowl

Open asianumbrella copy & paste to your image resize by 75% and place on the bottom part of the screen

Open bubbles copy & paste to your image 

Open your tube of choice and copy & paste to your image resize as needed  (I resized 71%) and place  between the umbrella and stickbundle

Open butterfly copy & paste to your image resize by 25% free rotate 40 left  and place in the tree above the screen

Add a dropshadow of choice to your tube or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Valentine Love PTU

Valentine Love

I used the wonderful artwork  by Elias which you must be licensed to use. You can purchase this tube from Elias ArtShop which can now be found here  

I am using a awesome scrapkit called Cherry Berry Crush which is PTU by Gimptastic Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used Gems Masks72 which can be found here

Plugins used xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in 

advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also 

please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet 

your needs. I resize at the end by 75% to get a 600 X 600 tag

Copy & paste paper5 from the scrapkit onto your new image resize by 150% and apply your mask of 

choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask 

is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open envelopescatters copy & paste to your image and place the last envelope in the right bottom 

corner of your mask

Open balloon copy & paste to your image and place at the top left of your mask 

Open box and copy & paste to your image and place on the bottom of your balloon string

Open candy copy & paste to your image and place on top of your box

Open berry1 copy & paste to your image and place on the bottom of your candy

Open berry2 copy & paste to your image and place next to berry1

Open bottle copy & paste to your image and place on the bottom of your berries

Open heartscatter copy & paste to your image 

Open envelope copy & paste to your image and place at the top of your mask slightly to the right of 

the middle

Open giftbag copy & paste to your image resize by 78% and place next to your berries

Open frame4 copy & paste to your image resize by 78% and move to the top left corner of your mask Take your magic wand with the following setting 

and click inside your frame Then go to selections 

expand and expand with the following settings 

 Copy and paste paper2 on top of your frame and 

them go to selections invert then hit delete move this paper layer below your frame do not deselect   

Now open your tube of choice resize if needed flip horizontal and copy & paste to your image and 

place the part of the tube your want inside the frame hit delete now hit selections none  To to xero 

porcelain and apply the following settings to your tube

Open cherries copy & paste to your image and place in the upper left of your frame

Open cupcake copy & paste to your image and place next to giftbag

Open pearls copy & paste to your image and place across the bottom of your image

Open flower4 copy & paste to your image resize by 48% and place on the top part of your cherries

Open your tube of choice and copy & paste to your image resize as needed and place on the right 

side of your frame  

Open label1 copy & paste to your image and place on the bottom of your tube

Open label2 copy & paste to your image and place below label1

Add a dropshadow of choice to your tube, pearls, frame or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!