Saturday, April 30, 2016

Spring into Beautiful PTU

Spring into Beautiful
I used the wonderful artwork called Little Flower Tube Pack by Arthur Crowe which you must be licensed to use. You can purchase this tube from Arthur Crowe Factory which can now be found here  
I am using a awesome scrapkit called Spring House which is PTU by Creative Crazy Scraps and can be found at CCS here  
Font of Choice  
Mask of Choice I used gems mask 45 & 52 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper7 from the scrapkit onto your new image and apply your mask of choice.(I used mask 52) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Copy & paste paper8 from the scrapkit onto your new image and apply your mask of choice.(I used mask 45) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element20 copy & paste to your image and place on the left side of your masks
Open element29 copy & paste to your image and place at the top in the middle next to the top paper
Open element27 copy & paste to your image and place at the top right next to the orange flower 
Open element21 copy & paste to your image and place at the top right of your mask 
Open element15 copy & paste to your image and place in the middle bottom of your mask
Open element42 copy & paste to your image resize by 75% and place at the bottom of your masks
Open element37 copy & paste to your image and place at the bottom left of your masks
Open element10 copy & paste to your image flip horizontal and place at the top left of your mask 
Open element36 copy & paste to your image and place at the bottom of the tag in the middle
Opem element13 copy & paste to your image and place to the right of your owl
Open element6 copy & paste to your image and place in the top right of your mask Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper9 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame  do not deselect  Open your tube and copy & paste to your image resize as needed  and place it inside your frame and position so that it is on the right side of the frame  I then opened another tube and place it on the right side of the frame and changed the blend mode to multiply hit delete on each of the tube layers and them selections select none
Open element39 copy & paste to your image and place on the bottom of the orange 3 paper element
Open element3 copy & paste to your image duplicate x1 and place in the bottom left of your mask side by side
Open element46 copy & paste to your image and place on the bottom right of your image
Open element12 copy & paste to your image resize by 50% and place on the top of the birdhouse
Open your tube of choice copy & paste to your image resize as needed and place on the left bottom of your image  

Add a dropshadow of your choice to the frame, tube and any other element your want!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Sunday, April 24, 2016

Gothic Death PTU

Gothic Death
I used the wonderful artwork called Death Lover 3 by Di Halim which you must be licensed to use. You can purchase this tube from Scraps N Company which can now be found here 
I am using a awesome scrapkit called Gothic Days which is PTU by Creative Crazy Scraps and can be found at CCS here  
Font of Choice  
Mask of Choice I used DBV mask110 & 111 which can be found here
The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs. I resize at the end by 75% to get a 600 X 600 tag
Copy & paste paper6 from the scrapkit onto your new image and apply your mask of choice.(I used mask 111) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice.(I used mask 110) (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)  In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.
Open element42 copy & paste to your image and place on the bottom of your masks
Open element23 copy & paste to your image and place at the top right of your mask 
Open element9 copy & paste to your image and place at the top right of your masks
Open element36 copy & paste to your image and place at the top right of your mask 
Open element43 copy & paste to your image and place in the middle left of your masks
Open element17 copy & paste to your image and place at the bottom left of your masks
Open element22 copy & paste to your image and place at the bottom left of your masks
Open element45 copy & paste to your image and place at the top left of your mask 
Open element19 copy & paste to your image and place inside on the bottom of element22
Open element50 copy & paste to your image and place in the top left of your mask Take your magic wand with the following setting and click inside your frame Then go to selections expand and expand with the following settings  Copy and paste paper7 on top of your frame and them go to selections invert then hit delete move this paper layer below your frame  do not deselect  Open your tube and copy & paste to your image resize as needed  and place it inside your frame and position so that the part of the tube your want to keep is inside the frame then hit delete go to selections and select none
Open element1 copy & paste to your image and place on the bottom middle of your frame
Open element7 copy & paste to your image and place in the bottom right of your mask
Open element35 copy & paste to your image and place in the middle of element7
Open element32 copy & paste to your image and place on the top right of element7
Open your tube of choice copy & paste to your image resize as needed and place on the right of your image so that the bottom is across the bottom of the first element you placed
Open element 29 copy & paste to your image and place just to the left of the bottom of your tube

Add a dropshadow of your choice to the frame, tube and any other element your want!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!