A Very Sexy Witch PTU

A Very Sexy Witch

I used the wonderful artwork by Cris Delara which you must be licensed to use. You can purchase the tubes from The PSP Project which can now be found here  

I am using a beautiful scrapkit called Sexy Witch which is PTU by Amy Marie   and can be found at The PSP Project here  

Font of Choice  

Mask of Choice DBV111 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet 

your needs.

Copy & paste paper13 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 

Open 101 copy & paste to your image and place on the top in the middle of your mask 

Open 69 copy & paste to your image and place just below the moon

Open 31 and copy & paste to your image 

Open 4 copy & paste to your image and place it on the right side of your village

Open 111 copy & paste to your image and place on the left side of your village

Open 80 copy & paste to your image and place across the bottom of your village road

Open 8 copy & paste to your image and place on the top part of the tree on the left

Open 6 copy & paste to your image resize by 50% and place on the bottom right of the tree on the right

 Open 110 copy & paste to your image resize by 50% and place on right of the spider

 Open 30 copy & paste to your image resize by 50% and place on the bottom of the tree on the left

 Open 33 copy & paste to your image resize by 50% and place on the bottom of your book

 Open 48 copy & paste to your image resize by 50% and place above the tree on the right

 Open 25 copy & paste to your image resize by 50% and place on top of the tree on the left

Open your tube of choice resize if needed and place in the middle of your image

 Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Crisp Autumn PTU

Crisp Autumn

I used the wonderful artwork called Nata by Alex Prihodko which you must be licensed to use. You can purchase his tubes from PicsForDesign which can now be found here  

I am using a beautiful scrapkit called Season of Change which is PTU by Gimtastic Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice DBV111 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper5 from the scrapkit onto your new image resize by 150% and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open fence copy & paste to your image and place on the top in the middle of your mask 

Open pinebranch copy & paste to your image duplicate x1 and flip horizontal the duplicate place one on each end of the bottom of the fence

Open wheel and copy & paste to your image and place in the middle of the fence

Open petals copy & paste to your image and place it on the right side of your fence

Open branch copy & paste to your image and place across the top of your fence starting at the second board

Open birdhouse copy & paste to your image and place on the right side of your fence

Open lantern copy & paste to your image resize by 50% and place on the bottom left of the fence

Open mushroom copy & paste to your image and place on the left side of the bottom of the birdhouse

Open frame2 copy and paste to your image and place at the bottom on your mask  Taking you magic wand with the following setting click inside each of the frame opening go to selections modify and expand with the following setting  Now open paper7 copy & paste to your image go to selections invert and them hit delete  move this layer below your frame selection select none

Open you image of choice resize if need and then duplicate x1 and flip horizontal the duplicate place the part of the tube your want to show in each of the end openings of the frame then using the same settings as above click inside each of the end openings them expand same as above then go to selection invert and click on each tube layer and hit delete selections select none

Open pumpkin copy & paste to your image and place on top of the middle frame opening

Open your tube of choice and copy & paste to your image resize as needed  and place so that they are on top of the frames

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Welcome to My Home PTU

Welcome to My Home

I used the wonderful artwork called Felinea Web by Gabi Spree which you must be licensed to use. You can purchase these tubes from The PSP Project  which can now be found here  

I am using a scrapkit called Jere which is PTU by Wicked Princess Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used  DBV113 Designs by Vaybs is here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open curtain copy & paste to your image  duplicate x1 flip horizontal the dupicate and place them at the top of your mask on each side so that there is a small hole between them at the top

Open bird copy & paste to your image resize by 50% and place in the middle of your mask

Open birdcage and copy & paste to your image and place it in the middle of your mask so that the top is at the top of your mask 

Open flower4 copy & paste to your image and place on the right side of your mask 

Open floor copy & paste to your image resize by 85% and place on the bottom of your mask

Open book and copy & paste to your image and place it at the bottom right of your floor  

Open pillow copy & paste to your image resize by 50% and place it on the bottom left corner of the book

Open table copy & paste to your image resize by 50% and place it above the pillow

Open image5 copy & paste to your image resize by 50% and resize again by 50% and place it on the table

Open candle copy & paste to your image resize by 50% and resize again by 50% and place it on the table

Open glass copy & paste to your image resize by 50% and resize again by 59% and place it on the table

Open coatstand copy & paste to your image and place on the left side curtain

Open mask copy & paste to your image  resize by 50% dublicate x1 and place one in each corner of the top of the curtains

Open your tube of choice and copy & paste to your image resize as needed and place so that the cat is sitting on the pillow if you use this tube

 Add a dropshadow of choice to your tube, flower, bird or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Even Darkness is Beautiful PTU

Even Darkness is Beautiful

I used the wonderful artwork by Enamorte which you must be licensed to use. You can purchase these tubes from CDO which can now be found here  

I am using a scrapkit called Darkness Calls which is PTU by Gimptastic Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice I used  DBV110 Designs by Vaybs is here

Plugins used Xero Porcelain

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper9 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open bottle copy & paste to your image resize by 50% and place in the bottom right corner of your mask

Open pumpkin copy & paste to your image and place on the left of your bottle slightly up from the bottom

Open holywater and copy & paste to your image and place on the left side of your mask slightly up from the bottom

Open goblet copy & paste to your image and place between your bottle and pumpkin

Open crystal ball copy & paste to your image and place on the bottom left just off your mask

Open jar and copy & paste to your image and place it at the bottom left between your holywater and crystalball 

Open book copy & paste to your image and place it on top the the goblet

Open leaf1 copy & paste to your image and place it in the right top corner of your mask

Open flower3 copy & paste to your image and place it on top of the leaf

Open moon copy & paste to your image and place it on the top left corner of your mask

Open birds copy & paste to your image and place it on top of the moon

Open skulls&rose copy & paste to you image resize by 50% and place in the top middle of the frames

Open Skull copy & paste to you image resize by 50% and place in the bottom middle of the book

Open frame3 copy & paste to your image and move to the top of your image  Using your magic wand with the following settings

click inside your frames and expand your selections with the following settings

Open paper 5 copy and paste to your image - go to selections invert and hit delete on your keyboard.  Selections select none Move this layer below your frame.

Open your tube of choice and copy & paste to your image resize as needed  (I used 3 different tubes by the same artist in this tag) and place them under each of the frame openings then take your eraser tool and carefully erase the parts of the tube that are outside the frame Then go Effects Xero Porcelain and apply with the following setting

to each of the tubes in the frames.

Open your tube of choice and copy & paste to your image resize as needed and place in the middle of the frames

 Add a dropshadow of choice to your tube, skull, frame or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

The Bride Awaits PTU

The Bride Awaits

I used the wonderful artwork called Bride of Frankenstein by Joahannah Von Frankenstein which you must be licensed to use. You can purchase her tubes from The PSP Project  which can now be found here  

I am using a scrapkit called The Haunting Hour which is PTU by Tasha's Playground and can be found at The PSP Project here  

Font of Choice  

Mask of Choice  Vix mask 363 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper01 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group. 

Open e11 copy & paste to your image and place on the top right of your image

Open e43 copy & paste to your image duplicate x1 and place them across the bottom of your mask 

Open e59 and copy & paste to your image and place on the right side of your mask

Open e65 copy & paste to your image resize by 50% and placeon the right side of the leaves on the bottom of the mask

Open e40 copy & paste to your image and place it on the left top of your mask

Open e39 copy & paste to your image and place so that the top part of the leaves is in the clouds  

Open e25 copy & paste to your image and place on top of the moon

Open e20 copy & paste to your image resize by 75% and place on the left pile of leaves

Open e67 copy & paste to your image resize by 75%  and place on the left end of the leaves

Open e68 copy & paste to your image resize by 75% and place on the left next to the pile of skulls

Open e01 copy & paste to your image  and in the left bottom corner of your image

Open e53 copy & paste to your image and place in the middle top of your mask

Open e60 copy & paste to your image resize by 50% and place on the right corner of the leaves

Open e69 copy & paste to your image and place across the cauldron

Open e34 copy & paste to your image and place the bottom at the top of your skulls

Open your tube of choice copy & paste to your image resize as needed and place on the left side of your image

Add a dropshadow of choice to your tube, bat or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Wish PTU

Wish

I used the wonderful artwork called At Your Service by Elias which you must be licensed to use. You can purchase his tubes from Elias Art  which can now be found here  

I am using a scrapkit called I Dream of Genie which is PTU by Gimptastic Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice  Vix mask 431 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper4 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load)

In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer

merge merge group. 

Open columns copy & paste to your image and place on the top left of your image

Open branch copy & paste to your image and place on top of your column so that a small part is above the top duplicate and place this one below the other

Open leaf and copy & paste to your image and place it at the top right of your image

Open deco3 copy & paste to your image and place on the right side of your mask in the middle

Open flower2 copy & paste to your image and place it in the middle of your leaf

Open frame5 copy & paste to your image free rotate 90 degrees and place in the center of your image Take your magic wand with the following setting and click inside your frame opening and expand your selections with the following settings  Open paper9 copy & paste to your image and them hit selections invert then hit delete then selections none move this layer below your frame

Open veil copy & paste to your image and place in the middle of your frame opening

Open your tube of choice resize if needed and place on top of your frame

Open pillow2 copy & paste to your image duplicate x1  and place them side by side on the bottom of the frame

Open bottle copy & paste to your image   and place on the left side of the left pillow

Open lantern copy & paste to your image and place in the left corner of your frame

Open waterpot copy & paste to your image  and place so that the water part in on the right pillow

Open candle copy & paste to your image resize by 50% and place on the right corner of your right pillow

Open crystalball copy & paste to your image and place next to your bottle

Open keys copy & paste to your image and place across the crystalball bottle and pillow

Add a dropshadow of choice to your tube, frame or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

See the Beauty PTU

See the Beauty

I used the wonderful artwork called Flower Queen by Alena Lazareva which you must be licensed to use. You can purchase her tubes from The PSP Project  which can now be found here  

I am using a scrapkit called V is for Valentine which is PTU by Sam's Scraps and can be found at The PSP Project here  

Font of Choice  

Mask of Choice Vix mask 451 which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper  4 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layermerge merge group.  Resize by 115%

Open pearly leaf copy & paste to your image and place on the top left of your mask

Open fabic flower3 copy & paste to your image and place in the top right of your mask

Open frame3 and copy & paste to your image resize by 40%  Take your magic wand with the following setting

 and click inside your frame click selections expand with with following settings

 open paper1 copy & paste to your image click selections invert hit delete selections none move this layer below your frame

Open your tube of choice resize if needed and place in the middle of your mask now take your eraser tool and carefully erase any part of the tube that covers the bottom of the frame

Open Fuzzy trim1 copy & paste to your image and place it on the bottom below your frame

Open fuzzy trim2 copy & paste to your image and place it on the bottom below your frame slightly to the right of fuzzy trim1

Open rose2 copy & paste to your image and place it on your frame just above the flowers

Open rose3 copy & paste to your image and place on the left side of your frame just above the bottom curve

Open rose1 copy & paste to your image and place above rose3

Add a dropshadow of choice to your tube, frame or anything you would like to!

Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!