Beautiful In May FTU

Beautiful In May

I used the wonderful artwork called Celine by Verymany which you must be licensed to use. You can purchase this tube at Verymany Tubes here

I am using a awesome FTU scrapkit called MayFlower by Pam's Scraps & More which can be found here

Font of Choice  

Mask of Choice I used WSL255 (Weescotlass) which can be found here

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 800 X 800 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper 4 from the scrapkit onto your new image and apply your mask of choice.  (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.  

Open arbor copy & paste to your image and place in the top right corner of your mask

Open Leaves2 and copy & paste to your image and place in the top left corner of your mask  

Open tulips3 copy & paste to your image and place it in the top left corner of your mask

Open bottle copy & paste to your image and place on the bottom left side of your mask

Open tulips2 copy & paste to your image and place so that the flowers are just below your tulips3

Open tulips copy & paste to your image and place to the right of tulips3

Open frame4 copy & paste to your image move it in the top right corner of your mask.  Using your magic wand with the following settings click inside your frames and expand your selections with the following settings

Open paper2 copy and paste to your image - go to selections invert and hit delete on your keyboard.  Selections select none Move this layer below your frame.

Open your tube of choice and copy & paste to your image resize as needed (I did not resize this tube)  Move this layer below your frame and position it so that the part of the tube you want to keep is inside the frame opening Take you eraser tool and erase any of the tubes that is not in the frame or you can do the same directions as for the paper inside the frame.  Change the blend mode on the tube layer to screen. Add a dropshadow of choice to your frame

Open flower2 copy & paste to your image and place across the top right corner of your frame

Open flower4 copy & paste to your image and place in the bottom right corner of your frame

Open vine copy & paste to your image and place on the left side of your frame

Open lantern copy & paste to your image and place the red flowers on the bottom of your bamboo

Open dragon copy & paste to your image and place on the bottom part of your bottle

Open rose copy & paste to your image resize by 55% and place on the bottom left of your frame

Open rose2 copy & paste to your image resize by 55% and place to the right of rose

Open your tube copy & paste to your image  resize if needed (I resized 55%)  and place on the right side of your frame Add a dropshadow of your choice to your tube

Open flower6 copy & paste to your image resize by 40% duplicate x1  and place on the bottom part of your tube side by side with one slightly higher than the other

 Add your copyrights and name of choice and you are finished!!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

The Mystery of Romance PTU

The Mystery of Romance

I used the wonderful tube called Your Secret Admirer by Sue Miller which you must be licensed to use. You can purchase this tube from The PSP Project which can  be found here

I am using a scrapkit called Milada by Devilish Dezines which can be found at The PSP Project here

Mask of Choice I used Weescotlass WSL254 which can be found here

Font of Choice

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper3 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open element9 copy & paste to your image and place on the bottom of your mask

Open element26 copy & paste to your image resize by 97% and place above element9

Open element4 copy & paste to your image resize by 34% and place in the top right corner of your image

Open element2 copy & paste to your image resize by 60% and place below the clock

Open element18 copy & paste to your image resize by 60% and place in the left bottom of your mask

Open element34 copy & paste to your image resize by 60% and place in the top left of  your mask

Open element15 copy & paste to your image resize by 60% and place on top of the red leaves

Open element35 copy & paste to your image resize by 60% and place below the other brown leaves on the left

Open element16 copy & paste to your image resize by 40% and place just below the middle of your mask on the right side

Open element43 copy & paste to your image and place in the top left of  your mask

Open frame2 copy & paste to your image resize by 75%  Using your magic wand with the following settings

click inside your frames and expand your selections with the following settings

Open paper 6 copy and paste to your image - go to selections invert and hit delete on your keyboard.  Selections select none Move this layer below your frame. Open element3 copy & paste to your image resize by 80% and place on the left side of your paper inside the frame take your eraser tool and erase all the shows outside the frame

Open your tube or tubes of choice and copy & paste to your image resize as needed (I did not resize)  Move this layer below your frame  Using your magic wand with the same setting as above click anywhere on your image (make sure you are on your tube layer) then click selections invert selections float selections defloat Take you eraser tool and then click on your frame layer and erase any part of the frame that you want your tube to show then hit selection select none 

Open element37 and copy & paste to your image resize by 40% and place in the middle bottom of your frame

Open element10 copy & paste to your image resize by 40% and place on the left side of your letters

Open element19 copy & paste to your image resize by 40% and place on the left bottom corner of your frame

Open element12 copy & paste to your image resize by 30% and place in the top left of your frame

 Add a dropshadow of choice to your tube or anything you would like

Now add your copyright and name you would like on the tag and you are finished!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Lovely Day in the Garden PTU

Lovely Day in the Garden

I used the wonderful tube called Margaret by Vermany which you must be licensed to use. You can purchase this tube from Verymany Tubes which can  be found here

I am using a scrapkit called Lovely Day by Gimptastic Scraps which can be found at The PSP Project here

Mask of Choice I used Weescotlass WSL220 which can be found here

Font of Choice

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper9 from the scrapkit onto your new image resize by 150%  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open Frame4 and copy & paste to your image and move to the top of the mask 

Open trellis and copy & paste to your image and move to the top of the mask

Open ladder and copy & paste to your image and place on the top left of your mask

Open fluffy plant and copy & paste to your image and place in the top right of your mask

Open leaf 2 and copy & paste to your image duplicate x1 and place one at the bottom of the ladder and one to the right of the first one slightly up from the first one

Open leaf and copy & paste to your image duplicate x1 and place them on the ladder so that it looks like vines climbing up

Open flower2 copy & paste to your image resize by 50% duplicate x3  and place them on the vines on the ladder 

Open flower1 copy & paste to your image duplicate x1 and place in the middle of your image side by side

Open fence copy & paste to your image and place in the bottom right of your image

Open key copy & paste to your image and place on the left side of your fence

Open grass copy & paste to your image duplicate x3 and place them across the bottom of your fence

Open stones copy & paste to your image resize by 75% and place to the left of the fence

Open basket and copy & paste to your image and place to the left of your fence 

Go back to your stones layer and open you eraser tool and erase all of the stones that are on the bottom and sides of the basket

Open plant copy & paste to your image and place on the right side of your fence

Open apple copy & paste to your image resize by 75% and place on the right bottom of your basket

Open your tube of choice copy & paste to your image resize as needed (I resized 60%) and place on the right bottom of your image

Add a dropshadow of choice to your tube or anything you would like

Now add your copyright and name you would like on the tag and you are finished!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

When Things Are Dark PTU

When Things Are Dark

I used the wonderful tube called Chica Vitral by Enys Guerrero which you must be licensed to use. You can purchase this tube from CDO which can  be found here

I am using a scrapkit called My Darkest Hour by Crazy Creative Scraps which can be found at CDO here

Mask of Choice I used Weescotslass WSL223 which can be found here

Font of Choice

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper4 from the scrapkit onto your new image and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open ele8 and copy & paste to your image and place on the bottom middle of your mask

Open fra1 and copy & paste to your image and move to the top left of the mask

Open ele4 and copy & paste to your image duplicate x2 and place them in a row across the top of the mask so that it starts in the left corner and ends in the middle

Open ele10 plant and copy & paste to your image and place in the top right of your image

Open ele23 and copy & paste to your image and place on the right bottom part of the moon

Open fra3 copy & paste to your image  Using your magic wand with the following settings click inside your frame

and expand your selections with the following settings

Open paper 2 copy and paste to your image - go to selections invert and hit delete on your keyboard.  Selections select none Move this layer below your frame.

Open your tube or tubes of choice and copy & paste to your image resize as needed (I did not resize)  Move this layer below your frame  Using your magic wand with the same setting as above click anywhere on your image (make sure you are on your tube layer) then click selections invert selections float selections defloat Take you eraser tool and then click on your frame layer and erase any part of the frame that you want your tube to show then hit selection select none 

Open ele6 and copy & paste to your image and place so that the skull is on the bottom of her arm 

Open ele25 copy & paste to your image resize by 75% and place just below the pink flower

Open ele27 copy & paste to your image and place in the bottom left of your frame

Open ele35 copy & paste to your image resize by 75% and place above the left side of your flower candle

Open ele17 copy & paste to your image resize by 50% and place on the right side bottom of your frame

Open ele31 copy & paste to your image and place on the left side of your jar

Open ele34 copy & paste to your image resize by 75% and place to the right of the jar with the heart

Open ele5 and copy & paste to your image and place in the right top corner of your frame on the moon

 Add a dropshadow of choice to your tube or anything you would like

Now add your copyright and name you would like on the tag and you are finished!

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!

Steampunk Cute PTU

Steampunk Cute

I used the wonderful tube called Steampunk by Cute Loot which you must be licensed to use. You can purchase this tube from The PSP Project which can  be found here

I am using a scrapkit called World of Steampunk by Wicked Princess Scraps which can be found at The PSP Project here

Mask of Choice I used Weescotlass WSL297 which can be found here

Font of Choice

The tut was written in Paint Shop Pro X4 but should work in others.

Note When I resize I use these settings: (make sure that pixel dimensions is on percent and in advanced setting it is smart size lock aspect ratio is checked and resize all layers is unchecked) also please save often and for placement on the tag you can always refer to the example tag if that helps.

Let's get started!!

Open a new image 600 X 600 pixels with a transparent background.  You can resize later to meet your needs.

Copy & paste paper6 from the scrapkit onto your new image  and apply your mask of choice. (Click layers, load save mask, make sure fit to canvas, source luminance and hide all mask is checked then click load) In layers right click on mask hit delete and answer yes to the popup. Now right click on group layer merge merge group.

Open Cog1 and copy & paste to your image  

Open Frame2 and copy & paste to your image  

Open element Sp11 and copy & paste to your image and place in the right bottom corner of your mask

Open leaves and copy & paste to your image and place in the top left corner of our mask

Open cluster1 and copy & paste to your image and place in the top right of your mask 

Open clock2 and copy & paste to your image 

Open boxes and copy & paste to your image and place it in the bottom left of your mask

Open key2 copy & paste to your image and place in the right bottom of your mask

Open balloon copy & paste to your image resize by 43% and place in the top left of your image

Open blimp copy & paste to your image resize by 43% and place in the middle top of your mask

Open boot2 copy & paste to your image resize by 43% and place on the right corner of the boxes

Open hat copy & paste to your image resize by 43% and place on the end of the key

Open butterfly2  and copy & paste to your image resize by 43% and place in the top right corner of your image

Open your tube of choice copy & paste to your image resize as needed (I resized 80%) and place on the left bottom of your image

I hope you liked this tut and please let me know it anything is not correct. Thank you.

Be Creative as you want!